저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인

NEMIX RAM

NEMIX RAM 8GB DDR3 1333 PC3-10600 2Rx8 1.35V 204-PIN SODIMM POSIFLEX EK-2130 memory upgrade

SKU CH-5SBP-SZRV9

8GB DDR3 SODIMM running at 1333 MHz with CL9 timing for POSIFLEX EK-2130 kiosks

  • Capacity8GB
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • 8 GB capacity expands kiosk multitasking headroom
  • DDR3 1333 speed matches POSIFLEX EK-2130 specs
  • 35 V low-voltage operation reduces power draw
  • 204-pin SODIMM form factor fits Mercury Series slot
  • CL9 latency supports responsive point-of-sale transactions

POSIFLEX EK-2130 memory upgrade

This 8 GB DDR3 SODIMM is built for the POSIFLEX EK-2130 Mercury Series kiosk. It targets IT staff who maintain point-of-sale terminals and need a drop-in module that matches the original specification.

DDR3 1333 PC3-10600 2Rx8 1.35 V

The module runs at 1333 MT/s with CL9 latency, 2Rx8 organisation and 1.35 V operating voltage. That exact combination of speed, rank layout and voltage decides whether the kiosk will POST and run stably.

Low-power unbuffered DDR3 operation

As an unbuffered non-ECC SODIMM without a heat spreader, it draws minimal power and produces no audible noise. The 1.35 V rating keeps thermal output low inside the compact kiosk chassis.

주요 특징

  • 8 GB capacity expands kiosk multitasking headroom
  • DDR3 1333 speed matches POSIFLEX EK-2130 specs
  • 35 V low-voltage operation reduces power draw
  • 204-pin SODIMM form factor fits Mercury Series slot
  • CL9 latency supports responsive point-of-sale transactions

사양

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-828K1
Capacity8GB
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM

이 상품에 대한 질문

What real-world speed does the DDR3 1333 PC3-10600 rating deliver in the POSIFLEX EK-2130?

The module runs at 1333 MT/s with CL9 latency, providing the standard DDR3 1333 bandwidth the kiosk's memory controller expects.

How does the 204-pin SODIMM interface limit performance in this kiosk?

The 204-pin DDR3 SODIMM form factor caps transfer rate at DDR3 1333; the board cannot use faster DDR3 or later DDR generations.

What physical slot and voltage does the 1.35 V 2Rx8 module require?

It installs in a 204-pin DDR3 SODIMM slot and operates at 1.35 V low voltage with a 2Rx8 chip organisation.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.