SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00503901BTC
재고 있음
NEMIX RAM
NEMIX RAM 96GB (2×48GB) DDR5-6400 ECC RDIMM CL52 1.1V 2Rx8 Supermicro H13DSG-OM memory upgrade
96GB DDR5-6400 ECC registered RDIMM kit (2×48GB, CL52, 1.1V) validated for Supermicro H13DSG-OM servers
- Capacity96GB (2 x 48GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 96 GB kit lets your Supermicro H13DSG-OM run fully populated at rated capacity
- DDR5-6400 CL52 at 1.1 V matches the board's exact timing and voltage expectations
- Registered ECC design offloads the controller and corrects single-bit errors to prevent silent corruption
- 2Rx8 288-pin RDIMM form factor is the precise module type the motherboard requires
- Major-brand Samsung, Micron or Hynix chips deliver enterprise-grade reliability for production workloads
Server memory kit for Supermicro H13DSG-OM
This 96GB kit contains two 48GB DDR5-6400 Registered ECC RDIMMs built to the exact rank, voltage and timing the Supermicro H13DSG-OM motherboard expects. It is designed for administrators upgrading that specific platform to its full supported capacity.
DDR5-6400 Registered ECC limits
Registered DIMMs buffer address and control signals so the memory controller can drive every slot at the rated 6400 MT/s speed with CL52 latency at 1.1 V. Unbuffered UDIMMs or SODIMMs do not fit the 288-pin RDIMM slots and will not operate on this board.
Verify your configuration before ordering
Consult the Supermicro H13DSG-OM manual for the approved DIMM population order, maximum capacity per channel and any BIOS version requirements. The board requires Registered ECC RDIMMs; other form factors or non-ECC modules are incompatible.
주요 특징
- 96 GB kit lets your Supermicro H13DSG-OM run fully populated at rated capacity
- DDR5-6400 CL52 at 1.1 V matches the board's exact timing and voltage expectations
- Registered ECC design offloads the controller and corrects single-bit errors to prevent silent corruption
- 2Rx8 288-pin RDIMM form factor is the precise module type the motherboard requires
- Major-brand Samsung, Micron or Hynix chips deliver enterprise-grade reliability for production workloads
사양
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-4828K2 |
| Capacity | 96GB (2 x 48GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 96GB 2X48GB DDR5 6400MHz PC5-51200 2Rx8 1.1V 288-PIN ECC RDIMM KIT |
이 상품에 대한 질문
Should I pick the 96GB (2×48GB) kit or a different capacity for my Supermicro H13DSG-OM?
The 96GB (2×48GB) kit matches the board's DDR5 RDIMM slots and registered ECC design; consult your manual for the approved population order and maximum supported capacity per channel before choosing another size.
What does the DDR5-6400 (PC5-51200) rating deliver once the modules are installed in the server?
The modules run at 6400 MT/s with CL52 latency at 1.1V, giving the memory controller the exact speed and timing it expects for full-capacity operation across both DIMMs.
How does the 288-pin RDIMM interface and registered ECC design affect real-world limits?
The registered buffer lets every slot run fully populated at 96GB total while ECC corrects single-bit errors on the fly, preventing silent data corruption and unplanned reboots in production.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
