SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00500306BTC
재고 있음
NEMIX RAM
NEMIX RAM 96GB DDR5 6400 CL52 2Rx4 1.1V ECC RDIMM Supermicro H14DST-F memory upgrade
96GB DDR5 6400 CL52 2Rx4 1.1V ECC registered RDIMM validated for Supermicro H14DST-F servers
- Capacity96GB
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- Exact-match 96GB DDR5-6400 CL52 2Rx4 module runs at rated speed
- Registered ECC RDIMM architecture offloads controller for full-slot stability
- 10V operation matches server memory controller expectations precisely
- Verified fitment for Supermicro H14DST-F motherboard 288-pin slots
- Lifetime replacement warranty with US-based technical support included
Exact-match DDR5 RDIMM for Supermicro H14DST-F
This 96 GB DDR5 6400 module delivers PC5-51200 bandwidth at 1.10 V with CL52 latency. The 2Rx4 registered ECC design matches the motherboard's memory controller expectations so the system recognises full capacity and runs at rated speed without manual tuning.
Registered ECC architecture limits
Registered buffering offloads the memory controller allowing every slot to run fully populated at full capacity while ECC corrects single-bit errors on the fly. The 288-pin RDIMM form factor is required by this board and will not fit UDIMM or SODIMM slots. Consult the system manual for supported capacities and approved DIMM population order before installation.
2Rx4 rank and 1.10 V voltage decide compatibility
The precise 2Rx4 organisation and 1.10 V operating voltage are the single specifications that determine whether this module works in your Supermicro H14DST-F. A different rank structure or voltage will prevent the board from initialising the memory at its rated DDR5 6400 speed.
주요 특징
- Exact-match 96GB DDR5-6400 CL52 2Rx4 module runs at rated speed
- Registered ECC RDIMM architecture offloads controller for full-slot stability
- 10V operation matches server memory controller expectations precisely
- Verified fitment for Supermicro H14DST-F motherboard 288-pin slots
- Lifetime replacement warranty with US-based technical support included
사양
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-9624K1 |
| Capacity | 96GB |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
이 상품에 대한 질문
Should I pick the 96GB 2Rx4 kit or a different capacity for my Supermicro H14DST-F?
The 96GB 2Rx4 registered ECC kit matches the board's memory-population rules so every slot runs fully populated at the rated DDR5 6400 speed.
What does the DDR5 6400 rating actually deliver once the modules are installed?
The modules run at 6400 MT/s with CL52 latency at 1.1V, giving the bandwidth the server's memory controller expects for full-capacity operation.
How does the 288-pin RDIMM interface limit what I can install?
The 288-pin registered RDIMM form factor is required by the H14DST-F; UDIMM or SODIMM modules will not fit or function in this board.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
