SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00502088BTC
재고 있음
NEMIX RAM
NEMIX RAM CSE-735D4-668B 32GB (4x8GB) DDR4 3200 ECC UDIMM memory upgrade
32 GB DDR4 3200 ECC UDIMM kit (4 × 8 GB) validated for SuperMicro SuperWorkstation SYS-530A-IL and X12SAE-5 motherboards
- Capacity32GB (4 x 8GB)
- SpeedDDR4 3200 (PC4 25600)
- ECCYes
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 32 GB total capacity for memory-intensive workloads
- DDR4 3200 speed with CL22 latency for responsive throughput
- ECC unbuffered design protects data integrity in critical tasks
- 2 V operation keeps power draw low per module
- Validated for Supermicro SYS-530A-IL and X12SAE-5 platforms
SuperMicro Workstation Kit
This 32 GB kit contains four 8 GB DDR4 3200 ECC UDIMM modules built for the SuperMicro SuperWorkstation SYS-530A-IL and X12SAE-5 motherboard. Each stick runs at 1.20 V with CL22 latency and a single-rank 1Rx8 organisation. The unbuffered design fits standard 288-pin desktop slots without registered signalling. It targets IT professionals who need validated capacity for a specific SuperMicro platform.
Sustained Load Behaviour
Modules are stress tested under load before shipping to verify stability during extended workloads. ECC circuitry corrects single-bit errors on the fly, preventing data corruption during long compute sessions. The 1.20 V operating voltage keeps thermals modest even when all four slots are populated. No heat spreader is fitted, so case airflow determines peak temperature during continuous operation.
DDR4 Interface Limits
The PC4-25600 rating caps transfer rate at 3200 MT/s on this platform. Unbuffered topology restricts maximum usable capacity per channel compared to registered alternatives. Four ranks total across the kit occupy all available slots on the target board, leaving no room for further expansion. Builders needing more memory must choose a different motherboard or registered DIMM platform.
주요 특징
- 32 GB total capacity for memory-intensive workloads
- DDR4 3200 speed with CL22 latency for responsive throughput
- ECC unbuffered design protects data integrity in critical tasks
- 2 V operation keeps power draw low per module
- Validated for Supermicro SYS-530A-IL and X12SAE-5 platforms
사양
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | SuperMicro DDR4 3200MHZ ECC Unbuffered UDIMM |
| Part Number | ME25600-818K4 |
| Capacity | 32GB (4 x 8GB) |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Supermicro |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 ECC UDIMM |
| Rank | 1Rx8 |
| Features | DDR4 ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 32GB (4X8GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 288-PIN ECC Unbuffered UDIMM KIT |
이 상품에 대한 질문
Does the 1.20 V DDR4 3200 kit add noticeable heat or fan noise during continuous workloads?
The modules run at the standard 1.20 V with no heat spreader, so they stay within normal DDR4 thermal limits and do not require extra cooling beyond typical chassis airflow.
What must the system provide for these 288-pin UDIMMs to operate?
A SuperMicro motherboard with DDR4 UDIMM slots that support ECC unbuffered memory at 3200 MT/s and 1.2 V, such as the X12SAE-5 used in the SYS-530A-IL workstation.
Will the CL22 1Rx8 modules run alongside existing DDR4 ECC UDIMMs of the same voltage in the same board?
Yes, provided the other sticks are also 1.2 V DDR4 ECC unbuffered UDIMMs; the board will operate all populated slots at the lowest common speed and latency.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
