SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.0050167BTC
재고 있음
NEMIX RAM
NEMIX RAM CSE-E101-04 8GB DDR5 4800 CL40 1.1V SODIMM memory upgrade
8GB DDR5 4800 SODIMM module built for SuperMicro IoT SuperServer SYS-E100-13AD-H and X13SAN-H boards
- Capacity8GB
- SpeedDDR5 4800 (PC5 38400)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 8 GB capacity expands system memory for SuperMicro SYS-E100-13AD-H
- DDR5 4800 speed delivers PC5-38400 bandwidth for responsive workloads
- CL40 latency at 1.10 V balances timing with low power draw
- 262-pin SODIMM form factor fits compatible SuperMicro IoT SuperServer platforms
- 1Rx8 unbuffered non-ECC design uses major OEM chips for stable operation
What this memory upgrade is for
This NEMIX RAM SODIMM adds 8GB of DDR5 capacity to compatible SuperMicro IoT SuperServer SYS-E100-13AD-H and X13SAN-H platforms. It is a non-ECC, unbuffered module built for system-specific compatibility. Buyers needing registered or ECC memory for other server boards cannot use this module.
Thermals noise and power draw
The module runs at the standard DDR5 voltage of 1.10V without a heat spreader, relying on system airflow for cooling. As a passive component it produces no audible noise and its power draw scales with the 4800 MT/s data rate during normal operation.
Behaviour under sustained load
All modules are stress tested under load by the manufacturer to verify stability at CL40 timings. The 1Rx8 organisation and major OEM chipsets from Samsung, Micron or Hynix maintain consistent throughput during extended workloads. Systems requiring higher capacity per slot or multi-rank configurations will not be served by this single-rank design.
주요 특징
- 8 GB capacity expands system memory for SuperMicro SYS-E100-13AD-H
- DDR5 4800 speed delivers PC5-38400 bandwidth for responsive workloads
- CL40 latency at 1.10 V balances timing with low power draw
- 262-pin SODIMM form factor fits compatible SuperMicro IoT SuperServer platforms
- 1Rx8 unbuffered non-ECC design uses major OEM chips for stable operation
사양
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | SuperMicro DDR5 4800MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS38400-818K1 |
| Capacity | 8GB |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 262-Pin DDR5 SODIMM |
| Rank | 1Rx8 |
| Features | DDR5 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 8GB (1X8GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 262-PIN Non-ECC Unbuffered SODIMM |
이 상품에 대한 질문
How do I install this 262-pin DDR5 SODIMM in my SuperMicro SYS-E100-13AD-H, and what step is often missed?
Power off the server, open the chassis, align the notch on the 262-pin module with the slot key, press firmly until both side clips click, then verify 4800 MT/s speed in BIOS.
What maintenance or replacement will this 8 GB 1Rx8 module need over its service life?
No scheduled maintenance is required; the module has no heat spreader and runs at 1.10 V, so only replace it if a memory test reports errors or capacity must be increased.
What limit appears first when this CL40 DDR5 4800 memory runs under sustained load?
The CL40 latency at 4800 MT/s sets the throughput ceiling; sustained workloads will hit this timing boundary before voltage or thermal limits become a factor.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
