저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인

NEMIX RAM

NEMIX RAM DDR4 ECC Unbuffered UDIMM 64GB (4x16GB) 2933MHz CL21 1.2V 288-Pin memory upgrade

SKU CH-47Y8-HMJG1

64 GB kit of four 16 GB DDR4 ECC unbuffered UDIMMs running at 2933 MHz CL21 1.2 V for Supermicro X12SAE and X12SCA-F motherboards

  • Capacity64GB (4 x 16GB)
  • Type288-Pin DDR4 ECC UDIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCYes
  • ECC protection stops silent data corruption with single-bit error correction
  • 64 GB total capacity delivered as four 16 GB modules for full population
  • DDR4-2933 CL21 at 1.2 V matches the board's rated speed and timing
  • 288-pin unbuffered UDIMM form factor fits Supermicro X12SAE and X12SCA-F slots exactly
  • Major OEM Samsung, Micron or Hynix chips ensure validated component quality

Exact-match 64 GB DDR4 ECC kit

This 64 GB kit contains four 16 GB unbuffered ECC UDIMMs that run at DDR4 2933 with CL21 latency at 1.2 V. It is built for owners of Supermicro X12SAE or X12SCA-F motherboards who need the precise rank, voltage and timing the board expects.

Capacity and headroom for ECC workloads

Four 1Rx8 modules populate the board's four DIMM slots and deliver 64 GB of error-correcting memory for virtualization, ZFS storage or database tasks. Workloads that exceed 64 GB will require a platform that supports larger DIMMs or higher-density kits.

DDR4 2933 unbuffered ECC UDIMM requirement

The motherboard only accepts 288-pin unbuffered ECC UDIMMs at DDR4 2933; registered DIMMs, SODIMMs or non-ECC modules will not work. Verify your board's qualified-vendor list and population rules before ordering.

주요 특징

  • ECC protection stops silent data corruption with single-bit error correction
  • 64 GB total capacity delivered as four 16 GB modules for full population
  • DDR4-2933 CL21 at 1.2 V matches the board's rated speed and timing
  • 288-pin unbuffered UDIMM form factor fits Supermicro X12SAE and X12SCA-F slots exactly
  • Major OEM Samsung, Micron or Hynix chips ensure validated component quality

사양

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR4 ECC Unbuffered UDIMM Memory
Part NumberME23400-618K4
Capacity64GB (4 x 16GB)
Type288-Pin DDR4 ECC UDIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR4 ECC Unbuffered UDIMM Motherboard Compatible
Package Content64GB 4X16GB DDR4 2933MHz PC4-23400 1Rx8 1.2V 288-PIN ECC UDIMM KIT

이 모델의 다른 버전

같은 라인업에서 5개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

Will this DDR4 2933MHz CL21 1Rx8 kit run alongside existing DDR4 modules in a Supermicro X12SAE?

The kit is specified as an exact-match upgrade for the X12SAE and X12SCA-F at DDR4-2933 PC4-23400. Mixing modules with different speeds, ranks, or latencies can prevent the board from running at the rated speed or cause instability. For best results, populate all slots with identical 1Rx8 unbuffered ECC UDIMMs at 1.2V CL21.

How can I confirm the 64GB kit is detected at 2933MHz with ECC active after installation?

Enter the system BIOS or UEFI and verify the memory speed reads 2933MHz (PC4-23400), total capacity shows 64GB, and ECC is reported as enabled. In the operating system, tools such as dmidecode on Linux or CPU-Z on Windows will also display the speed, rank (1Rx8), voltage (1.2V), and ECC status.

Does the box contain only the four 16GB UDIMMs, or are any cables, screws, or tools included?

The package content lists only the 64GB kit of four 16GB DDR4 2933MHz PC4-23400 1Rx8 1.2V CL21 288-pin ECC unbuffered UDIMMs. No cables, brackets, screws, or installation tools are included.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.