SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00502024BTC
재고 있음
NEMIX RAM
NEMIX RAM DDR5 5600 64GB (2×32GB) CL46 2Rx8 1.1V ECC Registered RDIMM Supermicro H13SSF memory upgrade
64 GB kit of two 32 GB DDR5-5600 registered ECC RDIMMs at 1.1 V CL46, validated for the Supermicro H13SSF motherboard
- Capacity64GB (2 x 32GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 5600 (PC5 44800)
- CAS LatencyCL46
- Voltage1.10V
- ECCYes
- 64 GB capacity from two 32 GB modules for full Supermicro H13SSF population
- DDR5 5600 speed with CL46 latency matched to the board's memory controller
- Registered ECC architecture corrects single-bit errors to prevent silent data corruption
- 1 V operation meets the platform's exact voltage requirement
- 288-pin RDIMM form factor fits the server's DIMM slots precisely
Exact DDR5-5600 registered ECC kit for Supermicro
This 64 GB kit ships as two 32 GB modules rated at DDR5-5600 (PC5-44800) with CL46 timings at 1.10 V. Each stick is a 2Rx8 288-pin RDIMM built with major OEM DRAM and designed for servers that require registered, error-correcting memory.
Registered architecture
The buffered register reduces electrical load on the memory controller, allowing every slot to be populated at full capacity without signal degradation. ECC circuitry detects and corrects single-bit errors on the fly, preventing silent data corruption and unplanned downtime in production workloads.
Two-module kit enables dual-channel population
The matched pair lets you fill the board's recommended slots in the correct order for dual-channel operation and maximum bandwidth. No heat spreaders are fitted, so clearance inside dense 1U or 2U chassis is not affected. Lifetime replacement coverage and US-based technical support are included.
주요 특징
- 64 GB capacity from two 32 GB modules for full Supermicro H13SSF population
- DDR5 5600 speed with CL46 latency matched to the board's memory controller
- Registered ECC architecture corrects single-bit errors to prevent silent data corruption
- 1 V operation meets the platform's exact voltage requirement
- 288-pin RDIMM form factor fits the server's DIMM slots precisely
사양
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-328K2 |
| Capacity | 64GB (2 x 32GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 64GB 2X32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT |
이 상품에 대한 질문
What bandwidth does the DDR5-5600 interface provide for this kit?
The DDR5-5600 (PC5-44800) interface delivers up to 44800 MB/s per module, so the dual-channel pair provides the full rated throughput the Supermicro H13SSF memory controller expects.
What physical slot and module height does the 288-pin RDIMM require?
Each 32 GB module uses the standard 288-pin DDR5 RDIMM form factor with no heat spreader, fitting the H13SSF's DIMM slots and allowing full population without clearance issues.
Which DIMM slots should I populate first on the H13SSF, and what common step is missed?
Consult the H13SSF manual for the approved population order; the step most often missed is installing the modules in the exact sequence the board requires so the registered ECC kit is recognised at full 64 GB capacity.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
