SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00501112BTC
재고 있음
NEMIX RAM
NEMIX RAM DDR5 5600 768GB 12x64GB ECC RDIMM Supermicro H13SSH
768 GB DDR5-5600 ECC RDIMM kit with twelve 64 GB registered modules for Supermicro H13SSH servers
- Capacity768GB (12 x 64GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 5600 (PC5 44800)
- CAS LatencyCL46
- Voltage1.10V
- ECCYes
- 768 GB total capacity across 12 modules for maximum server density
- DDR5 5600 speed rated at CL46 latency for responsive data access
- ECC registered design corrects single-bit errors to protect critical workloads
- 1 V operation at 2Rx4 rank reduces power draw per module
- Verified 288-pin RDIMM fitment for Supermicro H13SSH motherboard
768GB DDR5-5600 ECC RDIMM kit
This 768GB kit contains twelve 64GB DDR5-5600 registered ECC RDIMMs built to the PC5-44800 standard. It runs at 1.1V with CL46 latency and a 2Rx4 rank structure on 288-pin modules. The memory is validated for the Supermicro H13SSH motherboard and uses major OEM DRAM from Samsung, Micron or Hynix.
For Supermicro H13SSH servers needing maximum
It suits administrators who must populate every slot with qualified registered DIMMs and rely on ECC to prevent silent data corruption. It is not for systems that require unbuffered UDIMMs, SODIMM form factors, lower voltages, different speeds, or non-ECC operation.
Install by following the motherboard manual
The registered design helps the memory controller drive all twelve slots at rated speed when populated correctly. Errors usually come from skipping the approved slot sequence, mixing ranks, or skipping the BIOS update the board vendor specifies for full-capacity support.
주요 특징
- 768 GB total capacity across 12 modules for maximum server density
- DDR5 5600 speed rated at CL46 latency for responsive data access
- ECC registered design corrects single-bit errors to protect critical workloads
- 1 V operation at 2Rx4 rank reduces power draw per module
- Verified 288-pin RDIMM fitment for Supermicro H13SSH motherboard
사양
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-924K12 |
| Capacity | 768GB (12 x 64GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 768GB 12X64GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
이 상품에 대한 질문
What motherboard slot type must my Supermicro H13SSH have for these 288-pin RDIMMs?
The H13SSH must provide 288-pin DDR5 RDIMM slots; this kit is built for that exact form factor and will not fit UDIMM or SODIMM sockets.
Will the registered 2Rx4 design let me fill all twelve slots at full 5600 speed?
Yes, the registered architecture offloads the memory controller so every slot can run fully populated at the rated 5600 MT/s without downclocking.
How do I verify the kit is running at 5600 MT/s with CL46 after installation?
Check the BIOS memory information or a tool like dmidecode to confirm each module reports 5600 MT/s, CL46, 1.1 V and ECC active.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
