SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00498417BTC
재고 있음
NEMIX RAM
NEMIX RAM DDR5 5600 ECC Registered RDIMM 384GB (4x96GB) CL46 1.1V 288-Pin Supermicro H13SSF memory upgrade
A 384GB DDR5-5600 ECC Registered RDIMM kit of four 96GB modules at CL46 and 1.1V, validated for the Supermicro H13SSF motherboard
- Capacity384GB (4 x 96GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 5600 (PC5 44800)
- CAS LatencyCL46
- Voltage1.10V
- ECCYes
- 384 GB total capacity from four 96 GB modules
- DDR5 5600 speed with CL46 latency for rated performance
- Registered ECC design corrects errors and supports full population
- 1 V operation matches the server memory controller specification
- Verified compatibility with Supermicro H13SSF motherboard
Capacity and form factor
This 384 GB kit contains four 96 GB DDR5 RDIMM modules built to the 288-pin registered form factor. It is designed for the Supermicro H13SSF motherboard and delivers the exact rank, voltage and timing that board expects for full-capacity operation.
Who this suits and who should look elsewhere
The kit suits administrators upgrading a Supermicro H13SSF system that requires registered ECC memory with a 2Rx4 organisation. Builders using consumer boards, laptops or any platform that accepts only unbuffered UDIMM or SODIMM modules cannot use these DIMMs.
Deciding specification
The registered ECC RDIMM architecture with a 2Rx4 layout is the single specification that determines compatibility; the memory controller must support registered modules and the correct population rules for all four slots to operate at the rated 5600 speed.
주요 특징
- 384 GB total capacity from four 96 GB modules
- DDR5 5600 speed with CL46 latency for rated performance
- Registered ECC design corrects errors and supports full population
- 1 V operation matches the server memory controller specification
- Verified compatibility with Supermicro H13SSF motherboard
사양
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-9624K4 |
| Capacity | 384GB (4 x 96GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 384GB 4X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
이 상품에 대한 질문
How do I install the four 96GB DDR5 RDIMMs in the Supermicro H13SSF and which population order is the one people get wrong?
The H13SSF requires Registered ECC RDIMMs in a specific slot sequence; the manual shows the exact population order for four 2Rx4 modules so the controller recognises the full 384GB at DDR5-5600.
What maintenance or replacement will this 384GB DDR5 ECC RDIMM kit need over its service life?
No scheduled maintenance is required; the modules have no heat spreaders to clean and ECC corrects single-bit errors on the fly, so replacement only occurs if a DIMM fails and the lifetime warranty covers it.
What is the first limit that appears when the kit runs sustained workloads at DDR5-5600 CL46?
The registered buffer and 1.10V operation keep every slot stable at rated speed, so the practical ceiling is the motherboard's maximum supported capacity rather than thermal or signal degradation.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
