SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.004997BTC
재고 있음
NEMIX RAM
NEMIX RAM DDR5 6400 384GB 4x96GB ECC RDIMM CL52 1.1V 2Rx4 Supermicro H14DSG-O-CPU memory upgrade
384 GB DDR5-6400 ECC registered RDIMM kit in four 96 GB modules at 1.1 V CL52 for Supermicro H14DSG-O-CPU
- Capacity384GB (4 x 96GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 384 GB total capacity from four 96 GB modules
- DDR5 6400 speed with CL52 latency at 1.10 V
- Registered ECC design corrects single-bit errors on the fly
- 2Rx4 dual-rank organisation lets all slots run fully populated
- 288-pin RDIMM form factor matches Supermicro H14DSG-O-CPU requirements
Exact-match server upgrade
This 384GB kit contains four 96GB DDR5 6400 registered ECC RDIMMs built for the Supermicro H14DSG-O-CPU motherboard. The modules run at 1.1V with CL52 timing and a 2Rx4 rank layout that matches the board's memory controller expectations. Full capacity and rated speed are recognised immediately when installed in the approved slots.
288-pin RDIMM form factor
Only 288-pin registered DIMMs fit this platform; unbuffered UDIMMs or SODIMMs will not seat or function. The 2Rx4 organisation and 1.10V operation are the precise electrical spec the Supermicro memory controller requires for stable population across all channels.
Sustained enterprise stability
Registered architecture buffers each command so the memory controller stays within its drive limits even with every slot populated. On-die ECC corrects single-bit errors in real time, preventing silent data corruption during continuous workloads. The modules operate without heat spreaders, relying on server chassis airflow for thermal management.
주요 특징
- 384 GB total capacity from four 96 GB modules
- DDR5 6400 speed with CL52 latency at 1.10 V
- Registered ECC design corrects single-bit errors on the fly
- 2Rx4 dual-rank organisation lets all slots run fully populated
- 288-pin RDIMM form factor matches Supermicro H14DSG-O-CPU requirements
사양
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-9624K4 |
| Capacity | 384GB (4 x 96GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 384GB 4X96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
이 상품에 대한 질문
What does the 6400 MT/s rating mean once the kit is installed in the Supermicro H14DSG-O-CPU?
The modules run at DDR5-6400 with CL52 latency at 1.1 V, delivering the full rated throughput when the board's memory controller is populated with all four 96 GB RDIMMs.
What interface standard do these modules use and what does it limit in practice?
They use the 288-pin DDR5 RDIMM interface, which matches the motherboard's registered DIMM slots and caps the kit to the board's supported population rules and maximum capacity per channel.
What physical requirements must the server meet to accept this 4 x 96 GB kit?
The system needs four 288-pin RDIMM slots wired for registered ECC memory and a memory-controller configuration that supports 2Rx4 96 GB modules at 1.1 V.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
