SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00500837BTC
재고 있음
NEMIX RAM
NEMIX RAM DDR5 6400 CL52 384GB (4x96GB) ECC Registered RDIMM Supermicro H14SSF memory upgrade
A 384 GB DDR5-6400 registered ECC kit (4 × 96 GB, 2Rx4, CL52, 1.1 V) validated for the Supermicro H14SSF motherboard
- Capacity384GB (4 x 96GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 384 GB total capacity from four 96 GB modules for dense server workloads
- DDR5 6400 speed with CL52 latency at 1.10 V for rated throughput
- Registered ECC RDIMM design corrects single-bit errors and stabilises fully populated slots
- 288-pin 2Rx4 form factor matches Supermicro H14SSF memory-population rules exactly
- Lifetime replacement coverage with US-based technical support included
Exact-match DDR5-6400 kit for Supermicro H14SSF
This 384 GB kit contains four 96 GB Registered ECC RDIMMs built to the precise rank, voltage and timing the motherboard expects. It is intended for administrators who need the full capacity recognised at rated speed without manual tuning.
Four dual-rank 96 GB modules at CL52 1.10 V
The Registered architecture lets every slot run fully populated at 6400 MT/s while ECC corrects single-bit errors on the fly. Headroom ends when the board's own population rules or maximum supported capacity are reached.
288-pin RDIMM form factor with no heat spreader
The modules fit only DDR5 RDIMM slots — UDIMM or SODIMM boards will not accept them. Verify the H14SSF manual for approved DIMM order and population limits before installation.
주요 특징
- 384 GB total capacity from four 96 GB modules for dense server workloads
- DDR5 6400 speed with CL52 latency at 1.10 V for rated throughput
- Registered ECC RDIMM design corrects single-bit errors and stabilises fully populated slots
- 288-pin 2Rx4 form factor matches Supermicro H14SSF memory-population rules exactly
- Lifetime replacement coverage with US-based technical support included
사양
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-9624K4 |
| Capacity | 384GB (4 x 96GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 384GB 4X96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
이 상품에 대한 질문
Will the 288-pin DDR5 6400 RDIMMs run correctly alongside any existing DDR5 modules I keep in the Supermicro H14SSF?
The kit is spec-matched to the board's memory-population rules; mixing with other DDR5 RDIMMs of different rank, voltage or timing may prevent full-speed operation, so populate all slots with this matched 4x96GB set for guaranteed 6400 CL52 1.1V operation.
How can I verify the kit is running at DDR5 6400 CL52 with ECC active after installation?
Enter the system BIOS or UEFI and confirm the memory frequency shows 6400 MT/s, CAS latency 52, voltage 1.1V and ECC mode enabled for all four DIMMs.
What exactly ships in the box and is anything else required to install the 384GB kit?
The package contains the four 96GB 2Rx4 288-pin DDR5 6400 CL52 1.1V ECC Registered RDIMMs; no extra cables, brackets or software are needed — just follow the motherboard manual for correct slot population.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
