SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00497904BTC
재고 있음
NEMIX RAM
NEMIX RAM DDR5 6400 ECC Registered RDIMM 288GB 6x48GB CL52 1.1V Supermicro H14DSH
Six 48 GB DDR5 RDIMMs deliver 288 GB of registered ECC memory at 6400 MT/s with CL52 latency and 1.1 V operation for Supermicro H14DSH servers
- Capacity288GB (6 x 48GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 288 GB total capacity from six 48 GB modules for dense server workloads
- DDR5 6400 speed with CL52 latency delivers rated throughput out of the box
- Registered ECC architecture corrects single-bit errors and supports full-slot populations
- 1 V operation matches the motherboard's voltage requirement for stable power draw
- Verified compatibility with the Supermicro H14DSH motherboard ensures correct fit and recognition
Exact-Match 288GB DDR5-6400 Kit
This 288GB kit contains six 48GB DDR5 6400 (PC5-51200) registered ECC RDIMMs. Each module runs at 1.1V with CL52 latency and a 2Rx8 organisation. The kit is built for the Supermicro H14DSH motherboard and matches the memory controller's rank, voltage and timing requirements for full-capacity recognition.
For Supermicro H14DSH Servers Needing 288GB
Suits administrators populating every DIMM slot on a Supermicro H14DSH board with registered ECC memory at the rated speed. Not for systems that require unbuffered UDIMMs, SODIMMs, lower capacities or a different DDR generation.
288-Pin Registered ECC DDR5 Form Factor
The modules use the 288-pin RDIMM form factor with registered (buffered) architecture and on-die ECC. This exact physical and electrical interface is what the H14DSH memory controller expects; any other form factor will not fit or function.
주요 특징
- 288 GB total capacity from six 48 GB modules for dense server workloads
- DDR5 6400 speed with CL52 latency delivers rated throughput out of the box
- Registered ECC architecture corrects single-bit errors and supports full-slot populations
- 1 V operation matches the motherboard's voltage requirement for stable power draw
- Verified compatibility with the Supermicro H14DSH motherboard ensures correct fit and recognition
사양
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-4828K6 |
| Capacity | 288GB (6 x 48GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 288GB 6X48GB DDR5 6400MHz PC5-51200 2Rx8 1.1V 288-PIN ECC RDIMM KIT |
이 상품에 대한 질문
What motherboard must I already have for this 6 x 48 GB DDR5-6400 ECC RDIMM kit to work?
The kit is validated for the Supermicro H14DSH motherboard, which uses the 288-pin Registered RDIMM form factor and expects DDR5-6400 (PC5-51200) modules at 1.1 V with CL52 timing.
How will these 2Rx8 registered modules behave if I keep older DDR5 RDIMMs in the same H14DSH board?
Mixing ranks or speeds forces all slots to run at the lowest common speed and voltage; the board manual should be consulted for approved population order before adding this 288 GB kit alongside existing memory.
How can I confirm the full 288 GB is recognised and ECC is active after installation?
Check the system BIOS or OS memory report for 288 GB total capacity, DDR5-6400 speed, 1.1 V operation and ECC enabled status.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
