저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인

NEMIX RAM

NEMIX RAM MR51200-744K8 1TB 8x128GB DDR5 6400 CL52 1.1V 4Rx4 ECC RDIMM memory upgrade

SKU CH-HC6B-NDTZN

1TB server memory kit with eight 128GB DDR5-6400 registered ECC modules at CL52 and 1.1V for Supermicro X14DBG-LC+ motherboards

  • Capacity1TB (8 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes
  • 1TB total capacity across eight 128GB modules
  • DDR5 6400 speed with CL52 latency at 1.1V
  • ECC and registered design prevents data errors
  • 288-pin RDIMM form factor fits Supermicro X14DBG-LC+
  • Built with major OEM Samsung, Micron, Hynix chips

Exact-Match 1 TB Server Kit

This NEMIX RAM kit delivers 1 TB of capacity across eight 128 GB DDR5 RDIMMs. It is built for administrators upgrading a Supermicro X14DBG-LC+ motherboard that requires registered ECC memory. The modules arrive new and ready for immediate installation in a production environment.

DDR5-6400 CL52 4Rx4 Registered ECC

The decisive specification is the 4Rx4 registered ECC organisation running at DDR5-6400 with a CL52 latency at 1.1 V. This exact rank, voltage and timing combination is what the memory controller expects to recognise full capacity and operate at the rated speed without down-clocking or training failures.

Eight-Slot Population for Supermicro X14DBG-LC+

The kit fills all eight DIMM slots with 288-pin RDIMMs, so the board must support eight registered modules in its validated population order. Registered buffering offloads the memory controller, allowing every slot to run fully populated at full speed, while on-die ECC corrects single-bit errors before they affect workloads. Builders needing UDIMM, SODIMM or non-ECC memory cannot use this kit.

주요 특징

  • 1TB total capacity across eight 128GB modules
  • DDR5 6400 speed with CL52 latency at 1.1V
  • ECC and registered design prevents data errors
  • 288-pin RDIMM form factor fits Supermicro X14DBG-LC+
  • Built with major OEM Samsung, Micron, Hynix chips

사양

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-744K8
Capacity1TB (8 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1TB 8X128GB DDR5 6400MHz PC5-51200 4Rx4 1.1V 288-PIN ECC RDIMM KIT

이 모델의 다른 버전

같은 라인업에서 5개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

What does the DDR5 6400 (PC5 51200) rating mean for actual throughput in a Supermicro X14DBG-LC+?

The kit operates at DDR5 6400 with CL52 timings and 1.1V, so each of the eight 128 GB RDIMMs transfers data at the motherboard's supported DDR5 6400 rate when all slots are populated per the board's population rules.

How does the 288-pin RDIMM registered ECC interface affect what the memory controller can do?

Registered buffering reduces electrical load on the controller, allowing all eight slots to run at full 6400 MT/s with ECC correcting single-bit errors on the fly.

What physical space and slot layout does the 8x128 GB 4Rx4 kit require?

Eight 288-pin DDR5 RDIMM slots are needed; the modules have no heat spreader, so they fit standard server DIMM spacing on the X14DBG-LC+.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.