EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
NZXT
A dual-chamber ATX mid-tower with seven pre-installed RGB fans, a control hub, 420 mm radiator support and wraparound tempered glass panels
The NZXT H9 Flow RGB+ is a white mid-tower case built around a dual-chamber layout that isolates the power supply and drives from the main component area. It ships with seven pre-installed RGB fans and an integrated control hub. Panoramic tempered glass panels wrap the front and side for a full view of the interior.
This model replaces a standard single-chamber case by adding three 140 mm fans at the bottom, three 140 mm fans on the side and one 120 mm fan at the rear, all connected to the included NZXT Control Hub. The jump is worth it when you want coordinated RGB lighting and a tidy fan-power distribution point without buying a separate controller.
Verify that your motherboard follows the ATX form factor and that your chosen CPU cooler fits within the case height. Confirm the graphics card length clears the front-right chamber and that any planned 420 mm radiator can be mounted on the top or front-right panels. Ensure your power supply is a standard ATX unit, as none is included.
| Motherboard Compatibility | ATX motherboards, standard cooling systems, large radiators, multiple hard drives |
|---|---|
| Color | White |
| Case Material | Stainless Steel Tempered Glass |
| Type | ATX Mid Tower |
| Power Supply | ATX motherboards, standard cooling systems, large radiators, multiple hard drives |
| With Power Supply | No |
| Side Panel | Stainless Steel Tempered Glass |
| Brand | NZXT |
| Model | NZXT H9 |
| Part Number | CM-H92FW-P1 |
| 80mm Fans | No |
| Pre-installed Fans | Bottom - 3 x 140mm / Rear - 1 x 120mm / Side - 3 x 140mm |
| Hot-Swap Drive Bays | 0 |
| Max GPU Length | ATX motherboards, standard cooling systems, large radiators, multiple hard drives |
| Max CPU Cooler Height | ATX motherboards, standard cooling systems, large radiators, multiple hard drives |
| Dimensions | 19.9" x 12.4" x 18.9" |
| Features | Dual chamber construction, control hub |
| 배송 무게 | 0.45 kg |
| 포장 크기 | 25 × 25 × 25 mm |
The case measures 19.9" wide, 12.4" deep and 18.9" high, so allow at least that footprint plus room for the wraparound tempered glass panels to open.
Plug each fan’s 3-pin DC cable into the hub’s fan headers, then connect the hub to a motherboard 5 V addressable-RGB header; the rear fan is a Case Version unit keyed for 3-pin control.
Perforated steel panels on the top, front-right and bottom act as intake filters; remove and rinse them periodically to maintain airflow.
이 진열대의 다른 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
결제할 코인과 가격을 확인할 통화입니다.
체크아웃 시 지갑에서 전송됩니다.
표시 전용 — 카탈로그 가격은 달러 기준입니다.
일치하는 통화가 없습니다.
사이트에서 사용할 언어를 선택하십시오.
No language matches that.
처음 방문하셨나요?
이미 계정이 있으신가요?
자동 재설정 기능은 없습니다. 이 쇼핑몰은 어떠한 메일도 보내지 않으므로 요청할 일회용 링크 자체가 없습니다. 계정에 등록된 이메일 주소를 그대로 두시면 담당자가 직접 확인해 처리합니다.
요청 접수
받은편지함으로 오는 것은 아무것도 없습니다 — 이 쇼핑몰은 메일을 전혀 보내지 않습니다. 담당자가 직접 확인해 처리합니다.
기억나셨나요?