저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Black 92mm square fan with dual ball bearing and three-pin connector

OEM Industries

OEM Industries 3610KL-04W-B56 92mm CPU cooler

SKU CH-5W77-Z77TG

A 92 mm dual ball-bearing fan with a 3-pin 12 V connector draws 0.43 A and fits compact CPU coolers

  • ColorBlack
  • TypeFan only
  • Fan Size92mm
  • Bearing TypeBall
  • Power Connector3 Pin
  • LEDNo
  • 92 mm fan fits compact CPU cooler builds
  • Dual ball bearing extends operating life under continuous load
  • 12 V 0.43 A draw keeps power demand low
  • Three-pin connector enables direct motherboard speed control
  • Black frame matches dark-themed component aesthetics

92 mm dual-ball-bearing fan for CPU cooling

This OEM Industries 3610KL-04W-B56 fan fits 92 mm mounting patterns and connects through a standard 3-pin header. It is suited to builders replacing a failed cooler fan or assembling a compact system that uses this specific frame size. The black frame and absent LED keep the appearance neutral inside any chassis.

Ball bearing and 0.43 A draw at 12 V

Dual ball bearings reduce wear compared with sleeve designs, helping the fan maintain consistent speed over long running periods. At 0.43 A the current draw stays modest on a 12 V rail, so the motherboard header or fan controller supplies ample headroom without extra power cables. Noise and thermal output scale with the PWM or voltage curve set in BIOS.

3-pin connector and fan-only form factor

The 3-pin plug provides power and tachometer feedback but not PWM control, so speed regulation relies on voltage adjustment from the board. No heatsink or mounting hardware is included, meaning the builder must supply a compatible 92 mm cooler base or bracket. This simplicity frees up space around the socket for tall memory modules or tight VRM heatsinks.

주요 특징

  • 92 mm fan fits compact CPU cooler builds
  • Dual ball bearing extends operating life under continuous load
  • 12 V 0.43 A draw keeps power demand low
  • Three-pin connector enables direct motherboard speed control
  • Black frame matches dark-themed component aesthetics

사양

Model3610KL-04W-B56
ColorBlack
TypeFan only
Fan Size92mm
Bearing TypeBall
Power Connector3 Pin
LEDNo

이 상품에 대한 질문

How do I mount the 92 mm fan with its 3-pin connector?

Align the four screw holes on the 92 mm frame with the motherboard or heatsink mounts, then press the 3-pin plug onto the 12 V fan header until it seats fully; the keyed pin prevents reverse insertion.

When should I replace the dual ball bearing fan?

Replace the fan when bearing noise becomes audible or RPM drops noticeably below the rated 0.43 A draw at 12 V, indicating bearing wear.

What thermal limit appears first during continuous 12 V operation?

The 3 W motor rating is the first limit; sustained full-speed running will hit the 3 W power ceiling before any other constraint.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.