OEM Industries
OEM Industries 4710NL-04W-B30 120x25mm 12V .32A 2-Wire CPU cooler
120 mm ball-bearing fan draws 0.32 A at 12 V with a two-wire power connector
- ColorBlack
- TypeFan only
- Fan Size120mm
- Bearing TypeBall
- Power Connector2 Wires
- LEDNo
- 120 mm square frame fits standard CPU mounts
- 12 V 0.32 A draws little power from the header
- Ball bearing resists wear for long service life
- Two-wire connector plugs straight into legacy fan headers
- Black finish blends with dark chassis interiors
OEM 120mm Ball-Bearing Fan
The OEM Industries 4710NL-04W-B30 is a 120 by 25 millimetre square DC cooler that runs on twelve volts and draws zero point three two amps. Its two-wire power connector suits basic motherboard headers or case fan controllers without PWM signalling. The black frame and blade design target system builders who need a straightforward replacement or supplementary airflow device.
Thermals Noise and Power Draw
Ball-bearing construction provides consistent rotation and a predictable acoustic profile during continuous operation. At the rated twelve-volt input the motor consumes roughly four watts, keeping the load on a standard fan header low. Without PWM control the fan runs at a fixed speed, so noise remains steady rather than ramping with temperature changes.
Two-Wire Simplicity
The two-wire lead delivers power only, meaning speed cannot be modulated by the motherboard. Builders who want automatic fan curves or software monitoring will need a PWM model instead. No LEDs, brackets or extra cables are included, keeping the package minimal for users who already have mounting hardware.
주요 특징
- 120 mm square frame fits standard CPU mounts
- 12 V 0.32 A draws little power from the header
- Ball bearing resists wear for long service life
- Two-wire connector plugs straight into legacy fan headers
- Black finish blends with dark chassis interiors
사양
| Model | 4710NL-04W-B30 |
|---|---|
| Color | Black |
| Type | Fan only |
| Fan Size | 120mm |
| Bearing Type | Ball |
| Power Connector | 2 Wires |
| LED | No |
이 상품에 대한 질문
How do I install the 4710NL-04W-B30 cooler and what step is often missed?
Mount the 120mm fan using its four corner holes, then connect the 2-wire lead to a 12V fan header; the step often missed is confirming the black wire goes to ground and the red to +12V so the .32A draw is correct.
What maintenance will the 4710NL-04W-B30 need later?
The ball bearing is sealed for life, so only periodic dust removal from the 120mm blades and the 25mm frame is required; no lubrication or bearing replacement is expected.
What limit appears first on the 4710NL-04W-B30 under sustained load?
The fixed 12V .32A supply caps maximum airflow, so thermal headroom hits its ceiling before the ball bearing shows wear.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear



