저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Square black micro fan 25x15mm with three-pin connector

OEM Industries

OEM Industries AD0205LB-D53 25x15mm 5V 0.04A 3-Pin Fan

SKU CH-NSKJ-BZQXF

A 25 mm square micro fan with ball bearing and three-pin connector runs at 5 V for compact router or switch cooling

  • ColorBlack
  • TypeFan only
  • Fan Size25mm
  • Bearing TypeBall
  • Power Connector3 Pin
  • Ultra-compact 25×15 mm frame fits tight router and switch chassis
  • Ball-bearing motor runs quietly at 5 V 0.04 A for long service life
  • Three-pin connector delivers tachometer feedback so the system monitors fan speed
  • Square 2.5 cm cooler profile matches standard micro-fan mounting holes
  • ADDA-engineered micro fan built for continuous cooling in networking gear

Micro fan for compact devices

The ADDA AD0205LB-D53 is a 25 mm square micro fan designed for 5 V DC operation. It draws 0.04 A through a three-pin connector with three wires. The black frame houses a ball bearing for reliable rotation in tight spaces.

Suited for embedded and networking hardware

This cooler serves routers switches and similar small enclosures that need active airflow within a 25 mm footprint. Builders who require higher static pressure larger dimensions or a different voltage should look at other models.

5 V 0.04 A three-pin power specification

The single deciding specification is the 5 V 0.04 A rating on a three-pin connector. Verify that your board header supplies exactly this voltage and current before purchase.

주요 특징

  • Ultra-compact 25×15 mm frame fits tight router and switch chassis
  • Ball-bearing motor runs quietly at 5 V 0.04 A for long service life
  • Three-pin connector delivers tachometer feedback so the system monitors fan speed
  • Square 2.5 cm cooler profile matches standard micro-fan mounting holes
  • ADDA-engineered micro fan built for continuous cooling in networking gear

사양

ModelAD0205LB-D53
ColorBlack
TypeFan only
Fan Size25mm
Bearing TypeBall
Power Connector3 Pin

이 상품에 대한 질문

How is the 3-pin connector installed on the AD0205LB-D53, and what step is often missed?

Align the three pins with the 5 V header on the router or switch board, press straight down until fully seated, and verify the keyed notch matches; the step often missed is confirming the key orientation before applying force.

What maintenance will the ball-bearing 25x15mm fan need later?

The ball bearing is sealed and rated for continuous operation; no lubrication or bearing service is required, only occasional dust removal from the blades with compressed air.

What limit appears first when the AD0205LB-D53 runs continuously at 5 V 0.04 A?

The motor draws a fixed 0.04 A at 5 V, so the first limit is the thermal ceiling of the ball bearing under sustained load rather than a current or voltage threshold.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.