Zyvpee DBTB0838B2S 80mm case fan 12V 2.1A 4-wire 7000 RPM 80 CFM 50 dBA 80x76mm
- Case Fan
- Case
OEM Industries
A 60 mm axial fan with dual ball bearings runs on 24 V and draws 0.11 A through a two-wire lead
This 60mm dual ball-bearing fan runs on 24 volts and draws 0.11 amps through a two-wire lead. It is built for OEM chassis that require a compact, high-reliability airflow source. The black frame fits standard 60mm mounting holes.
Swap this unit in when an existing 60mm 24V axial fan becomes noisy or fails. The dual ball bearing design extends service life over sleeve-bearing alternatives. The upgrade is worth it when downtime on a server or industrial appliance costs more than the fan itself.
Confirm your system supplies 24 volts DC and uses a two-wire power header. Check that the chassis has 60mm mounting holes with the standard screw pattern. Ensure the airflow direction matches the original design.
| Model | AFB0624HHD |
|---|---|
| Color | Black |
| Type | Fan only |
| Fan Size | 60mm |
| Bearing Type | Ball |
| Power Connector | 2 Wires |
| LED | No |
The fan uses a standard 60 mm square frame, so it matches common 60 mm mounting patterns.
Connect the two wires directly to a 24 V DC source; polarity must be observed for correct rotation.
Dual ball bearings typically last tens of thousands of hours; replace the fan if noise or vibration increases noticeably.
이 진열대의 다른 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
결제할 코인과 가격을 확인할 통화입니다.
체크아웃 시 지갑에서 전송됩니다.
표시 전용 — 카탈로그 가격은 달러 기준입니다.
일치하는 통화가 없습니다.
사이트에서 사용할 언어를 선택하십시오.
처음 방문하셨나요?
이미 계정이 있으신가요?
자동 재설정 기능은 없습니다. 이 쇼핑몰은 어떠한 메일도 보내지 않으므로 요청할 일회용 링크 자체가 없습니다. 계정에 등록된 이메일 주소를 그대로 두시면 담당자가 직접 확인해 처리합니다.
요청 접수
받은편지함으로 오는 것은 아무것도 없습니다 — 이 쇼핑몰은 메일을 전혀 보내지 않습니다. 담당자가 직접 확인해 처리합니다.
기억나셨나요?