Zyvpee DBTB0838B2S 80mm case fan 12V 2.1A 4-wire 7000 RPM 80 CFM 50 dBA 80x76mm
- Case Fan
- Case
OEM Industries
70mm 12V 3-pin CPU cooler with ball-bearing NIDEC fan for compact case cooling
The OEM Industries D07R-12T2L is a 70mm square fan designed for small-form-factor CPU cooling. It runs on 12V at 0.08A and uses a three-pin power connector. The unit suits builders who need a low-profile cooler for tight spaces.
Installation requires aligning the 70mm frame with standard mounting holes and plugging the 3-pin connector into a motherboard header. The ball bearing reduces friction noise over time. Misaligned screw holes or a missing 3-pin header on the board are the typical fitment issues.
Verify that your case or heatsink allows a 70 by 15mm fan footprint before ordering. Confirm the motherboard provides a three-pin fan header for power and speed reporting. This cooler lacks LED lighting and PWM control, so it will not suit builds needing four-pin speed regulation.
| Model | D07R-12T2L |
|---|---|
| Color | Black |
| Type | Fan only |
| Fan Size | 70mm |
| Bearing Type | Ball |
| Power Connector | 3 Pin |
| LED | No |
Check that the fan spins smoothly and the BIOS or monitoring software reports an RPM reading from the 3-pin connection.
The package contains the 70mm ball-bearing fan with its attached 3-pin cable; mounting screws and any required backplate are not included.
The D07R-12T2L is the single 12V 0.08A 7015 model listed; no other voltage or current variants are offered.
이 진열대의 다른 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
결제할 코인과 가격을 확인할 통화입니다.
체크아웃 시 지갑에서 전송됩니다.
표시 전용 — 카탈로그 가격은 달러 기준입니다.
일치하는 통화가 없습니다.
사이트에서 사용할 언어를 선택하십시오.
처음 방문하셨나요?
이미 계정이 있으신가요?
자동 재설정 기능은 없습니다. 이 쇼핑몰은 어떠한 메일도 보내지 않으므로 요청할 일회용 링크 자체가 없습니다. 계정에 등록된 이메일 주소를 그대로 두시면 담당자가 직접 확인해 처리합니다.
요청 접수
받은편지함으로 오는 것은 아무것도 없습니다 — 이 쇼핑몰은 메일을 전혀 보내지 않습니다. 담당자가 직접 확인해 처리합니다.
기억나셨나요?