Zyvpee DBTB0838B2S 80mm case fan 12V 2.1A 4-wire 7000 RPM 80 CFM 50 dBA 80x76mm
- Case Fan
- Case
OEM Industries
9 cm ball-bearing case fan delivering 55 to 60 cfm airflow at 20 to 25 dBA with a 3-pin 12 V connector
The OEM Industries D09A-12PM is a 9 cm ball-bearing fan designed for case cooling. It operates on 12 V power through a standard three-pin connector. The black frame holds a rotor rated for 2000 to 2499 rpm. No LED lighting is included.
Builders who want reliable case ventilation with low noise will appreciate the 20 to 25 dBA rating. The ball bearing offers durable operation at 55 to 60 cfm airflow. Buyers who need PWM speed control or illuminated fans should look elsewhere.
The only specification that determines compatibility is the three-pin power connector. Your motherboard or fan controller must provide a matching 12 V three-pin header. If the board uses a different header type, this fan will not connect.
| Model | D09A-12PM |
|---|---|
| Color | Black |
| Type | Fan only |
| Fan Size | 9CM |
| Bearing Type | Ball |
| Power Connector | 3 Pin |
| LED | No |
At 12 V the fan moves 55–60 cfm, enough to push air through a typical 9 cm heatsink or case vent without creating a bottleneck.
The 3-pin header supplies 12 V and a tach signal; voltage regulation from the motherboard can vary speed between roughly 2000 and 2499 rpm, but PWM duty-cycle control is not available.
The square 9 cm frame follows the standard 9025 hole pattern, so it lines up with any case or heatsink drilled for a 9 cm fan.
이 진열대의 다른 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
결제할 코인과 가격을 확인할 통화입니다.
체크아웃 시 지갑에서 전송됩니다.
표시 전용 — 카탈로그 가격은 달러 기준입니다.
일치하는 통화가 없습니다.
사이트에서 사용할 언어를 선택하십시오.
처음 방문하셨나요?
이미 계정이 있으신가요?
자동 재설정 기능은 없습니다. 이 쇼핑몰은 어떠한 메일도 보내지 않으므로 요청할 일회용 링크 자체가 없습니다. 계정에 등록된 이메일 주소를 그대로 두시면 담당자가 직접 확인해 처리합니다.
요청 접수
받은편지함으로 오는 것은 아무것도 없습니다 — 이 쇼핑몰은 메일을 전혀 보내지 않습니다. 담당자가 직접 확인해 처리합니다.
기억나셨나요?