Zyvpee DBTB0838B2S 80mm case fan 12V 2.1A 4-wire 7000 RPM 80 CFM 50 dBA 80x76mm
- Case Fan
- Case
OEM Industries
A 50 mm square fan runs on 12 V at 0.07 A with a three-wire connection
The OEM Industries D34666-58 is a square 50 mm cooling fan built around a NIDEC 5010 motor. It is intended for system integrators and repair technicians who need a direct replacement for a low-profile CPU cooler in small-form-factor chassis.
The decisive specification is the 12 V, 0.07 A three-wire interface; the motherboard header must supply exactly that voltage and current while accepting a standard three-pin connector for speed reporting.
The bare fan unit mounts onto an existing heatsink or OEM bracket, so the build must already provide the retention hardware and thermal interface material. It adds no RGB lighting or PWM control, leaving the system’s default fan curve to manage acoustic levels.
| Model | D34666-58 |
|---|---|
| Color | Black |
| Type | Fan only |
| Fan Size | 50mm |
| LED | No |
It draws 0.07 amps from a 12 volt motherboard header, so the power load is very small and most fan headers can supply it without trouble.
The third wire reports RPM to the motherboard, but voltage control is required to change speed because there is no PWM wire.
It needs a 50mm square mounting area and a standard 3-pin fan header on the motherboard for power and speed monitoring.
이 진열대의 다른 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
결제할 코인과 가격을 확인할 통화입니다.
체크아웃 시 지갑에서 전송됩니다.
표시 전용 — 카탈로그 가격은 달러 기준입니다.
일치하는 통화가 없습니다.
사이트에서 사용할 언어를 선택하십시오.
No language matches that.
처음 방문하셨나요?
이미 계정이 있으신가요?
자동 재설정 기능은 없습니다. 이 쇼핑몰은 어떠한 메일도 보내지 않으므로 요청할 일회용 링크 자체가 없습니다. 계정에 등록된 이메일 주소를 그대로 두시면 담당자가 직접 확인해 처리합니다.
요청 접수
받은편지함으로 오는 것은 아무것도 없습니다 — 이 쇼핑몰은 메일을 전혀 보내지 않습니다. 담당자가 직접 확인해 처리합니다.
기억나셨나요?