Zyvpee DBTB0838B2S 80mm case fan 12V 2.1A 4-wire 7000 RPM 80 CFM 50 dBA 80x76mm
- Case Fan
- Case
OEM Industries
80 mm fan with ball bearing and 12 V, 2.4 W two-wire power for case cooling
The OEM Industries KD1208PTB2 is an 80mm fan-only air cooler rated at 12V and 2.4W. Its two-wire power connector suits motherboards or fan controllers that supply 12V DC. The black ball-bearing unit targets builders assembling low-profile systems where a full heatsink assembly will not fit.
The slim 8025 frame slides into narrow chassis windows or proprietary OEM brackets without blocking adjacent slots. A two-wire lead connects directly to a 12V header, leaving four-pin PWM headers free for other fans. No LED lighting means no extra cables or software to manage.
Ball-bearing construction maintains consistent rotation during extended workloads without the wear pattern of sleeve bearings. The fixed 12V input delivers constant speed rather than ramping, so acoustic output stays predictable. Builders who need variable speed control or higher static pressure should consider a PWM-equipped alternative.
| Model | KD1208PTB2 |
|---|---|
| Color | Black |
| Type | Fan only |
| Fan Size | 80mm |
| Bearing Type | Ball |
| Power Connector | 2 Wires |
| LED | No |
The fan is rated at 12 V and 2.4 W, a level that standard motherboard headers or case fan controllers can sustain indefinitely without throttling.
The 80 mm ball-bearing design runs quietly at low RPM and the 2.4 W motor adds minimal heat to the chassis even after hours of continuous spinning.
A standard two-pin 12 V fan header is required; the cooler ships with a bare 2-wire lead that plugs directly into that header.
이 진열대의 다른 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
결제할 코인과 가격을 확인할 통화입니다.
체크아웃 시 지갑에서 전송됩니다.
표시 전용 — 카탈로그 가격은 달러 기준입니다.
일치하는 통화가 없습니다.
사이트에서 사용할 언어를 선택하십시오.
처음 방문하셨나요?
이미 계정이 있으신가요?
자동 재설정 기능은 없습니다. 이 쇼핑몰은 어떠한 메일도 보내지 않으므로 요청할 일회용 링크 자체가 없습니다. 계정에 등록된 이메일 주소를 그대로 두시면 담당자가 직접 확인해 처리합니다.
요청 접수
받은편지함으로 오는 것은 아무것도 없습니다 — 이 쇼핑몰은 메일을 전혀 보내지 않습니다. 담당자가 직접 확인해 처리합니다.
기억나셨나요?