OLYCRAFT 23PCS 3D Printer Nozzle Cleaning Tool Kit
A 23-piece kit with 10 cleaning needles from 0.2 mm to 0.4 mm, wire brushes, flush cutters, scrapers, diamond files and tweezers for clearing clogged nozzles and removing prints
- SpecificationStainless Steel, TOOL-OC0001-13-US13, 3.5052 L x 16.6878 W x
- FeaturesStainless Steel, Printed, 3d Printer Nozzle Cleaning Tools
- 23-piece kit covers every routine 3D-printer maintenance task
- 10 precision needles from 0.2 mm to 0.4 mm clear nozzle clogs fast
- Stainless-steel putty knife and scraper lift prints without damaging the bed
- Two wire brushes and flush cutters remove stray filament and support material
- Five diamond files and two tweezers finish fine detail work
23-piece nozzle cleaning kit
The OLYCRAFT set supplies 23 individual tools for clearing filament clogs and removing finished prints from the build plate. It targets hobbyists and small-shop operators who run FDM printers daily and need a single organised pouch for routine maintenance.
Stainless construction for repeated heat cycles
Needles, scrapers, flush cutters and diamond files are stainless steel, resisting corrosion from hot plastic residue. The kit adds no electrical load and produces no noise; hand pressure alone clears nozzles from 0.2 mm to 0.4 mm without damaging the orifice.
Replaces improvised picks and single-size needles
Builders who have been using sewing needles, dental picks or a lone 0.4 mm wire gain a full range of diameters plus dedicated scrapers and tweezers. The jump is worth it when clogs occur across multiple nozzle sizes or when print removal risks bed adhesion damage.
주요 특징
- 23-piece kit covers every routine 3D-printer maintenance task
- 10 precision needles from 0.2 mm to 0.4 mm clear nozzle clogs fast
- Stainless-steel putty knife and scraper lift prints without damaging the bed
- Two wire brushes and flush cutters remove stray filament and support material
- Five diamond files and two tweezers finish fine detail work
사양
| Brand | OLYCRAFT |
|---|---|
| Model | TOOL-OC0001-13-US13 |
| Part Number | TOOL-OC0001-13-US13 |
| Specification | Stainless Steel, TOOL-OC0001-13-US13, 3.5052 L x 16.6878 W x 23.0886 H centimeters, 0.222 kilograms |
| Features | Stainless Steel, Printed, 3d Printer Nozzle Cleaning Tools |
이 상품에 대한 질문
How do I use the 0.2mm, 0.25mm, 0.3mm, 0.35mm, 0.4mm cleaning needles without breaking them inside the nozzle?
Heat the nozzle to printing temperature, then gently insert the matching needle straight in; forcing it cold or at an angle snaps the thin stainless steel tips.
Which of the 23 pieces will wear out first and need replacing?
The 10 stainless steel cleaning needles deform after repeated clog clearing; the wire brushes and diamond files last longer but eventually lose abrasive bite.
What stops me from using this kit continuously during a long print farm run?
The needles are stored loose in a round tube; sorting the five diameters by hand slows you down when multiple nozzles clog back-to-back.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
