Orico J10 512GB M.2 2280 NVMe internal SSD with cooling vest
- Internal Solid Stat…
- M.2 2280
Orico
1TB M.2 2280 NVMe SSD with 3100 MB/s reads, 1900 MB/s writes and an included cooling vest for thermal control
Options 1TB
The Orico J10 is a 1TB internal NVMe SSD in the M.2 2280 form factor. It uses PCIe Gen3 x4 and 3D NAND flash to deliver read speeds up to 3100 MB/s and write speeds up to 1900 MB/s. A cooling vest and thermal pad are included in the package. It suits desktops, laptops and ultrabooks that have an NVMe slot.
The supplied cooling vest and thermal conductive silicone pad dissipate heat from the controller and NAND during sustained transfers. No moving parts mean the drive runs silently in normal use. Power draw follows the PCIe Gen3 x4 specification for an M.2 NVMe device.
Your motherboard or laptop must provide an M.2 2280 slot wired for PCIe NVMe. The drive arrives unallocated and without partitions, so the operating system will need to initialise and format it before use.
| Brand | ORICO |
|---|---|
| Series | ORICO J10 |
| Model | ORICO J10 |
| Device Type | Internal Solid State Drive (SSD) |
| Form Factor | M.2 2280 |
| Capacity | 1TB |
| Memory Components | 3D NAND |
| Interface | PCIe NVMe Gen3 x4 |
| Protocol | NVMe |
| HeatSink | with HeatSink |
| Features | 1. High-performance NVMe SSD with read speeds up to 3100 MB/s and write speeds up to 1900 MB/s, utilizing PCIe Gen3 x4 technology. 2. Ensured reliability and stability through 96 hours of rigorous testing, including sleep tests, read/write tests, high-temperature tests, and performance tests. 3. Compatible with PS5, PCs, and laptops, featuring M.2 2280 form factor and S.M.A.R.T. function support for efficient operation. 4. Equipped with a pre-installed aluminum heatspreader to dissipate heat and prevent throttling, ensuring sustained high performance. 5. Backed by a 5-year limited wa |
| Package Content | 1 x ORICO NVMe SSD 1 x Cooling vest 1 x Thermal conductive silicone pad 1 x User manual |
이 모델의 다른 버전
같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.
Insert the drive into the M.2 slot at a 30 degree angle, secure it with the motherboard screw, peel the film from the thermal pad, place the pad on the controller, then snap the vest over the drive so the fins face upward for airflow.
The drive itself needs no scheduled maintenance; trim runs automatically. For the vest, remove dust from the fins with compressed air every few months so heat can still escape.
Sustained write speed settles at up to 1900 MB/s; once the controller reaches its thermal threshold it will throttle to protect the 3D NAND.
이 진열대의 다른 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
결제할 코인과 가격을 확인할 통화입니다.
체크아웃 시 지갑에서 전송됩니다.
표시 전용 — 카탈로그 가격은 달러 기준입니다.
일치하는 통화가 없습니다.
사이트에서 사용할 언어를 선택하십시오.
처음 방문하셨나요?
이미 계정이 있으신가요?
자동 재설정 기능은 없습니다. 이 쇼핑몰은 어떠한 메일도 보내지 않으므로 요청할 일회용 링크 자체가 없습니다. 계정에 등록된 이메일 주소를 그대로 두시면 담당자가 직접 확인해 처리합니다.
요청 접수
받은편지함으로 오는 것은 아무것도 없습니다 — 이 쇼핑몰은 메일을 전혀 보내지 않습니다. 담당자가 직접 확인해 처리합니다.
기억나셨나요?