SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.0050176BTC
재고 있음
OWC
OWC 16GB DDR4 2666MHz CL19 ECC SODIMM 1.2V 2Rx8 memory upgrade for Synology FS1018
16 GB DDR4 ECC SODIMM at 2666 MHz CL19, 1.2 V, validated for Synology FS1018 NAS
- Capacity16GB (1 x 16GB)
- Type260-Pin DDR4 ECC SODIMM
- SpeedDDR4 2666 (PC4 21300)
- CAS LatencyCL19
- Voltage1.2V
- ECCYes
- 16GB single module expands Synology FS1018 capacity
- DDR4 2666MHz CL19 speed matches system spec
- ECC unbuffered design protects data integrity
- 2V low voltage reduces power draw
- 260-pin SODIMM form factor fits FS1018 slot
Synology FS1018 memory upgrade
This 16GB DDR4 ECC SODIMM is built specifically for the Synology Flashstation FS1018. It adds capacity to the NAS so the system can hold more data in memory at once. The module is unbuffered and follows JEDEC PC4-21300 timing at CL19. It targets administrators who need a straightforward capacity increase for that platform.
Thermals and power in normal use
The stick runs at the standard 1.2V DDR4 voltage and has no heat spreader. Power draw stays within the normal range for a 2666MHz ECC SODIMM. No active cooling is required and the module adds no audible noise. It is rated for continuous operation inside the FS1018 chassis.
What the bundle changes
The package contains only the single 16GB module; no tools, cables or software are included. Installation is a manual DIMM swap that does not void the NAS warranty. Backward compatibility with 2400MHz and 2133MHz systems means the same stick can be used if the platform is moved to a slower bus.
주요 특징
- 16GB single module expands Synology FS1018 capacity
- DDR4 2666MHz CL19 speed matches system spec
- ECC unbuffered design protects data integrity
- 2V low voltage reduces power draw
- 260-pin SODIMM form factor fits FS1018 slot
사양
| Brand | OWC |
|---|---|
| Part Number | 2C6D42R816GB |
| Capacity | 16GB (1 x 16GB) |
| Type | 260-Pin DDR4 ECC SODIMM |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Heat Spreader | No |
| Compatible System | Synology FlashstationFS1018 |
이 상품에 대한 질문
How do I install this 16GB DDR4 2666MHz CL19 ECC SODIMM into my Synology FS1018, and what step do people often miss?
Power off the NAS and unplug it. Open the chassis, locate the 260-pin DDR4 SODIMM slot, align the notch on the module, insert at an angle, then press down firmly until both side clips click. The step often missed is verifying the module is fully seated by checking both clips are locked.
What maintenance or replacement will this 1.2V 2Rx8 ECC Unbuffered module need over time?
No routine maintenance is required for this DDR4 SODIMM. It has no heat spreader or moving parts. Replacement is only needed if a memory error appears in DSM logs or the NAS fails to boot, which is rare for JEDEC-compliant ECC modules tested for the FS1018.
What limit appears first on this 16GB PC4-21300 CL19 module during sustained heavy workloads on the FS1018?
The primary limit is the single 16GB capacity ceiling. Under sustained heavy workloads, the FS1018 will exhaust available RAM before the 2666MHz CL19 speed or 1.2V thermal envelope becomes a bottleneck, triggering swap to slower storage.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
