저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인

OWC

OWC 16GB DDR4 3200 CL22 1.2V 288pin Desktop DIMM memory upgrade

SKU CH-8DP7-TW85D

16 GB DDR4 3200 CL22 DIMM upgrades Dell OptiPlex 7080, 7090 and XE4 SFF or tower systems

  • Capacity16GB
  • Type288-Pin DDR4 Non-ECC UDIMM
  • SpeedDDR4 3200 (PC4 25600)
  • CAS LatencyCL22
  • Voltage1.2V
  • ECCNo
  • 16 GB DDR4 3200 CL22 boosts responsiveness
  • JEDEC 100 % compliant ensures warranty safe upgrade
  • 2 V low voltage reduces power draw
  • 288 pin unbuffered UDIMM fits Dell OptiPlex 7080 7090 XE4 SFF Tower
  • Backward compatible with 2133 2400 2666 2933 MHz systems

16GB DDR4 3200 module for Dell OptiPlex

This 16GB DDR4 3200 CL22 UDIMM is built for Dell OptiPlex 7080 SFF, 7080 Tower, 7090 SFF, 7090 Tower and XE4 SFF systems. It runs at 1.2V without ECC or buffering and fits the standard 288-pin desktop slot. The module is JEDEC compliant and RoHS certified for a warranty-safe upgrade.

Sustained multitasking with backward speed support

Under continuous workloads the memory maintains its 3200MHz rating at CL22 timing. It also operates at 2133MHz, 2400MHz, 2666MHz and 2933MHz when the platform requires a lower speed. The dual-rank 2Rx8 organisation helps keep throughput steady during long sessions with many applications open.

Replaces slower or smaller DDR4 DIMMs in listed

The upgrade is worthwhile when the installed modules run below 3200MHz or total capacity limits multitasking. It is not suited for systems that need ECC, registered memory or a different form factor. Buyers whose chassis only accept low-profile modules should verify clearance before ordering.

주요 특징

  • 16 GB DDR4 3200 CL22 boosts responsiveness
  • JEDEC 100 % compliant ensures warranty safe upgrade
  • 2 V low voltage reduces power draw
  • 288 pin unbuffered UDIMM fits Dell OptiPlex 7080 7090 XE4 SFF Tower
  • Backward compatible with 2133 2400 2666 2933 MHz systems

사양

BrandOWC
Part Number3U2D42R816GB
Capacity16GB
Type288-Pin DDR4 Non-ECC UDIMM
SpeedDDR4 3200 (PC4 25600)
CAS LatencyCL22
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemDell OptiPlex 7080 SFF
Dell OptiPlex 7080 Tower
Dell OptiPlex 7090 SFF
Dell OptiPlex 7090 Tower
Dell OptiPlex XE4 SFF

이 모델의 다른 버전

같은 라인업에서 5개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

How much power does the 1.2V DDR4 3200 module draw when the OptiPlex runs all day?

At the JEDEC-standard 1.2 V the 16 GB stick runs at the low voltage the platform expects, so sustained load adds only the normal DDR4 power envelope — no extra cooling or PSU headroom is needed.

What must the Dell OptiPlex already have for this 288-pin UDIMM to work?

A free 288-pin DDR4 slot on a 7080 SFF, 7080 Tower, 7090 SFF, 7090 Tower or XE4 SFF; the board must accept non-ECC unbuffered memory, which these models do.

Will the CL22 3200 MHz stick run with older 2133 MHz or 2400 MHz modules I keep in the same OptiPlex?

Yes — the module is backward-compatible down to 2133, 2400, 2666 and 2933 MHz, so it will clock down to match the slowest installed DIMM.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.