저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Green rectangular DDR5 SODIMM module with black memory chips and gold edge connectors

OWC

OWC 16GB DDR5 4800 CL40 SODIMM memory upgrade for OptiPlex 7000 XE Micro 7010 Micro Plus

SKU CH-RJ35-HDGSF

A 16 GB DDR5 4800 CL40 SODIMM module built for Dell OptiPlex 7000 XE Micro and 7010 Micro Plus systems

  • Capacity16GB
  • Type262-Pin DDR5 Non-ECC SODIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.1V
  • ECCNo
  • 16GB DDR5 4800 CL40 boosts multitasking speed
  • JEDEC-standard 1.1V module ensures warranty-safe upgrade
  • Single 1Rx8 262-pin SODIMM fits OptiPlex 7000 XE Micro and 7010 Micro Plus
  • Replaces Dell parts AB949334 AC258275 SNPCYXXPC/16G SNPVNY72C/16G
  • ROHS-compliant DDR5 tested to meet OEM specifications

OWC 16 GB DDR5 SODIMM for OptiPlex Micro

This OWC module delivers 16 GB of DDR5 memory at 4800 MHz with CL40 latency. It uses a 262-pin SODIMM form factor and runs at 1.1 V. The kit is a single unbuffered, non-ECC 1Rx8 stick designed as a direct upgrade for Dell OptiPlex 7000 XE Micro and 7010 Micro Plus systems.

Suits builders upgrading those specific OptiPlex

The part replaces Dell part numbers AB949334, AC258275, SNPCYXXPC/16G and SNPVNY72C/16G. It is JEDEC-standard and RoHS compliant. Buyers with a different platform, a DIMM-only board, or a system that requires ECC or registered memory should look elsewhere.

The decisive spec is the 262-pin DDR5 SODIMM

Only systems that accept a 262-pin DDR5 SODIMM at 1.1 V can use this module. If your machine takes a different pin count, a different DDR generation, or a DIMM form factor, this upgrade will not fit.

주요 특징

  • 16GB DDR5 4800 CL40 boosts multitasking speed
  • JEDEC-standard 1.1V module ensures warranty-safe upgrade
  • Single 1Rx8 262-pin SODIMM fits OptiPlex 7000 XE Micro and 7010 Micro Plus
  • Replaces Dell parts AB949334 AC258275 SNPCYXXPC/16G SNPVNY72C/16G
  • ROHS-compliant DDR5 tested to meet OEM specifications

사양

BrandOWC
Part Number4S8D51R816GB
Capacity16GB
Type262-Pin DDR5 Non-ECC SODIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.1V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
Heat SpreaderNo
Compatible SystemDell OptiPlex 7000 XE Micro
Dell OptiPlex 7010 Micro Plus

이 모델의 다른 버전

같은 라인업에서 5개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

Will the 1.1V DDR5 SODIMM run stably alongside the original memory already installed in my OptiPlex 7010 Micro Plus?

The module operates at the standard 1.1V DDR5 voltage and uses the 262-pin SODIMM form factor, matching the electrical and physical requirements of the OptiPlex 7010 Micro Plus so it will run alongside existing memory that meets the same JEDEC DDR5 4800 specification.

How can I verify the 16GB DDR5 4800 CL40 module is recognised at its rated speed after installation?

After fitting the SODIMM, open Task Manager or the BIOS on the OptiPlex 7000 XE Micro and confirm the memory shows 16GB capacity, 4800MHz speed and CL40 latency.

Does the single 16GB SODIMM come with any brackets, screws or tools, or must I source them separately?

The upgrade consists only of the 1Rx8 262-pin DDR5 SODIMM itself; no brackets, screws or installation tools are included, and the OptiPlex chassis uses its existing retention clips so nothing extra is required.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.