저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Green circuit board with black memory chips and gold contacts

OWC

OWC 32GB DDR4 2133MHz PC4-17000 CL15 1.2V 288pin ECC Registered RDIMM 2R1D42R432GB memory upgrade

SKU CH-BA42-GA4FT

32 GB DDR4 2133 MHz ECC registered DIMM for Supermicro X10 server motherboards

  • Capacity32GB
  • Type288-Pin DDR4 ECC RDIMM
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.2V
  • ECCYes
  • 32 GB capacity handles large workloads on compatible Supermicro boards
  • ECC registered design detects and corrects data errors in servers
  • DDR4 2133 MHz CL15 speed matches PC4-17000 specification
  • 2 V operation lowers power use in always-on systems
  • 288-pin RDIMM form factor fits listed X10 and X10SDV motherboards

32GB DDR4 ECC RDIMM for Supermicro X10

This 32GB registered DDR4 module is built for Supermicro X10 server and workstation boards including the X10OBi-CPU, X10QBi, X10QBL-4, X10QBL-4CT and X10SDV-12C-TLN4F. It delivers error-correcting, buffered memory for workloads that require data integrity and sustained uptime. The module is not compatible with standard desktop platforms or unbuffered memory configurations.

288-pin registered DIMM without heat spreader

The stick uses a 288-pin DDR4 RDIMM form factor operating at 1.2V with CL15 latency at 2133MHz. Registered signalling reduces electrical load on the memory controller, allowing larger capacities per channel in multi-socket systems. The absence of a heat spreader keeps the profile low for dense server chassis where airflow is managed by the system fans.

Replaces Supermicro MEMDR432LHL01ER21 and similar

This module directly replaces Supermicro part numbers MEMDR432LHL01ER21, MEMDR432LSL01ER21 and MEMDR432LSV01ER21, extending the service life of existing X10 infrastructure or reducing cost on new builds. The upgrade is worthwhile when ECC registered memory is required and the target board appears on the validated compatibility list. It will not work in systems that only accept unbuffered non-ECC DIMMs.

주요 특징

  • 32 GB capacity handles large workloads on compatible Supermicro boards
  • ECC registered design detects and corrects data errors in servers
  • DDR4 2133 MHz CL15 speed matches PC4-17000 specification
  • 2 V operation lowers power use in always-on systems
  • 288-pin RDIMM form factor fits listed X10 and X10SDV motherboards

사양

BrandOWC
Part Number2R1D42R432GB
Capacity32GB
Type288-Pin DDR4 ECC RDIMM
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.2V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemSupermicro Motherboard X10OBi-CPU
Supermicro Motherboard X10QBi
Supermicro Motherboard X10QBL-4
Supermicro Motherboard X10QBL-4CT
Supermicro Motherboard X10SDV-12C-TLN4F

이 모델의 다른 버전

같은 라인업에서 5개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

What DDR4 standard and speed does this 32GB RDIMM use, and what throughput ceiling does that impose?

It runs at DDR4 2133 (PC4-17000) with CL15 latency, capping peak bandwidth at 17 GB/s per module.

What physical slot and form factor are required to install this 288-pin ECC registered DIMM?

A standard 288-pin DDR4 DIMM slot on a compatible Supermicro X10-series motherboard; no heat spreader means low-profile clearance.

How is this registered ECC module installed, and what common mistake should be avoided?

Align the notch, press firmly until the retention clips click, and do not mix it with unbuffered memory or install in a desktop board.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.