저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Black aluminium backplate with two 70 mm PWM fans, 1.5 mm thick, for RTX 3090

PANO-MOUNTS

PANO-MOUNTS GPU Backplate Cooler Dual 70mm PWM Fans 1.5mm Aluminum RTX 3090

SKU CH-R1SK-1XSH5

Dual 70 mm PWM fans and a 1.5 mm aluminium backplate cool RTX 3090 memory at 16–20 dBA

  • Bearing Type2 Ball
  • CompatibilityVGA Card Memory
  • RPM1500-2800RPM
  • Air FlowVariable
  • Noise Level16-20dBA
  • Power Connector4 Pin

Option GPU Backplate Cooler W / Thermal

  • Dual 70 mm ball-bearing fans adjust 1 500–2 800 RPM for strong airflow at 16–20 dBA
  • 5 mm aviation-grade 6061 aluminium backplate spreads heat over a larger surface than thinner designs
  • Upgraded elastic latch secures the cooler on flat RTX 3090, 3080 or 3070 cards without tools
  • Included 1.2 mm 7 W thermal pad fills gaps between memory and heatsink for better transfer
  • Compact 180 × 90 × 15 mm footprint fits tight builds while keeping weight low

GPU Backplate Cooler for RTX 3090

This aluminium backplate cooler mounts on the memory side of a graphics card. It uses two 70 mm dual-ball-bearing PWM fans that spin between 1500 and 2800 RPM. The 1.5 mm aviation-grade 6061 plate adds structural rigidity while spreading heat. A 1.2 mm 7W thermal pad is included for the memory modules.

For builders with flat-back RTX 3090 3080 3070 cards

The elastic latch secures the assembly on any flat metal backplate, making installation quick and tool-free. Noise stays between 16 and 20 dBA at full speed. Buyers whose cards have a curved backplate, a plastic shroud covering the memory area, or limited clearance between the PCB and the case side panel cannot use this cooler.

1.5 mm aluminium thickness decides fit

The 1.5 mm plate is thicker than common 1 mm alternatives, so it needs a flat mounting surface and enough vertical space above the memory chips. If the card’s backplate is uneven or the gap to the side panel is tight, the cooler will not seat correctly and memory temperatures will not improve.

주요 특징

  • Dual 70 mm ball-bearing fans adjust 1 500–2 800 RPM for strong airflow at 16–20 dBA
  • 5 mm aviation-grade 6061 aluminium backplate spreads heat over a larger surface than thinner designs
  • Upgraded elastic latch secures the cooler on flat RTX 3090, 3080 or 3070 cards without tools
  • Included 1.2 mm 7 W thermal pad fills gaps between memory and heatsink for better transfer
  • Compact 180 × 90 × 15 mm footprint fits tight builds while keeping weight low

사양

BrandPANO-MOUNTS
Bearing Type2 Ball
CompatibilityVGA Card Memory
RPM1500-2800RPM
Air FlowVariable
Noise Level16-20dBA
Power Connector4 Pin
Fan ColorBlack
LEDnone
FeaturesLIGHTWEIGHT & STURDY
Fan Dimensions2x (70x70x15mm)
Heatsink Dimensions1.2mm
Package ContentsCooling fans, thermal pad

이 모델의 다른 버전

같은 라인업에서 1개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

Does my RTX 3090 need a flat backplate surface for the 1.5mm aluminum heatsink to make proper contact?

Yes, the cooler is designed for flat universal graphics cards and must be installed on a flat surface; the elastic latch secures it once aligned.

Will the dual 70mm PWM fans connect to a standard 4-pin 2510 header on my existing graphics card?

The fans use a 4-pin 2510 PWM connector; verify your card has a matching header or an adapter before installation.

How can I confirm the cooler is operating correctly after mounting it on my RTX 3080?

Fan speed should vary between 1500 and 2800 RPM based on temperature, and noise should stay within the 16 to 20 dBA range under load.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.