Phanteks PH-F120SK_DRGB_PWM_WT01_3P 3-pack 120mm case fan white RGB
- 3 Fans
- No Controller
Phanteks
A 140 mm case fan with nine blades, 84.5 CFM airflow and 30.3 dB(A) noise, plus digital RGB lighting and PWM speed control
Fan Size 140mm
Option Single Pack
The Phanteks PH-F140SK_DRGB_PWM is a single 140 mm case fan built for builders who want adjustable airflow and addressable lighting in a standard mounting size. It fits any chassis with 140 mm mounting points and connects via a 4-pin PWM header for motherboard-controlled speed curves.
Nine blades move up to 84.5 CFM between 500 and 1 500 RPM while the Rifle bearing and rubber dampeners keep noise at 30.3 dB(A). The range covers silent idle to strong intake or exhaust, but the fixed 25 mm thickness limits maximum static pressure in restrictive radiators.
The 4-pin PWM connector allows the board to set any duty cycle within the rated speed band, yet the fan cannot exceed 1 500 RPM or drop below 500 RPM regardless of header capability. Twelve D-RGB LEDs draw power through the same cable and require a compatible 5 V 3-pin D-RGB header or Phanteks hub for synchronisation; they will not work on 12 V RGB or non-addressable headers.
| Brand | Phanteks |
|---|---|
| Series | SK PWM Fan 140mm D-RGB |
| Model | PH-F140SK_DRGB_PWM |
| Fan Counts | 1 Fan |
| Fan Controller | No Controller |
| Type | Case Fan |
| Compatibility | Case |
| Fan Size | 140mm |
| Fan Thickness | 25mm |
| Bearing Type | Rifle |
| RPM | 500 - 1500 +5% -10% RPM |
| Air Flow | 84.5 CFM |
| Noise Level | 30.3 dB(A) |
| Power Connector | 4 Pin |
| Color | Black |
| LED | Digital RGB |
| Features | Nine-blade design offers a higher airflow and quiet cooling solution for the best performance PWM capabilities built-in to precisely control the speed to achieve optimized fan curve Rigid frame design and included rubber dampeners helps to prevent vibration Low-noise operation without sacrificing performance Digital RGB lighting solution to sync with Phanteks DRGB products and compatible DRGB Motherboards |
| Dimensions | 140 x 140 x 25 mm |
| Package Contents | 1 x PH-F140SK_DRGB_PWM 4 x Fan Screws 8 x Rubber Pad |
| 배송 무게 | 0.20 kg |
| 포장 크기 | 193 × 143 × 27 mm |
이 모델의 다른 버전
같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.
Yes, the fan uses the standard 140mm square frame with 25mm thickness, so it aligns with existing 140mm mounting points in your case.
Connect the 4-pin PWM header to your motherboard and monitor the speed in BIOS or fan-control software; the fan should report between 500 and 1500 RPM under load.
The package contains the fan, four mounting screws and eight rubber pads only; a DRGB motherboard header or separate Phanteks DRGB controller is required to drive the 12 LEDs.
이 진열대의 다른 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
결제할 코인과 가격을 확인할 통화입니다.
체크아웃 시 지갑에서 전송됩니다.
표시 전용 — 카탈로그 가격은 달러 기준입니다.
일치하는 통화가 없습니다.
사이트에서 사용할 언어를 선택하십시오.
처음 방문하셨나요?
이미 계정이 있으신가요?
자동 재설정 기능은 없습니다. 이 쇼핑몰은 어떠한 메일도 보내지 않으므로 요청할 일회용 링크 자체가 없습니다. 계정에 등록된 이메일 주소를 그대로 두시면 담당자가 직접 확인해 처리합니다.
요청 접수
받은편지함으로 오는 것은 아무것도 없습니다 — 이 쇼핑몰은 메일을 전혀 보내지 않습니다. 담당자가 직접 확인해 처리합니다.
기억나셨나요?