저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Black cylindrical reservoir with matte end caps, 240 mm tube length

PrimoChill

PrimoChill CTR Hard Mount Reservoir 240mm Black POM TX Matte Black

SKU CH-8GMW-06D10

A 240 mm hard-mount reservoir with compression-ring end caps that seal G 1/4 ports without cutting or tapping the 57 mm ID acrylic tube

  • TypeReservoir
  • Compression-ring end caps seal without cutting tube
  • 240 mm reservoir length fits mid-tower builds
  • 25 in inner diameter supports high flow rates
  • Four low-profile port caps and two three-port end caps included
  • Made in the USA with laser-cut acrylic tube

240 mm Hard-Mount Reservoir

The PrimoChill CTR Phase II is a 240 mm compression-tube reservoir machined from laser-cut acrylic with POM end caps in a matte black finish. It uses compression-ring seals to create a watertight joint without cutting or tapping the tube, reducing stress that can cause cracking. G 1/4 threads accept standard water-cooling fittings. The package includes four low-profile port caps with O-rings and two three-port mountable end caps.

Modders seeking tool-free tube sealing

Builders who want a rigid reservoir that locks acrylic tubing in place without threading or adhesive will appreciate the compression-ring design. The 57 mm inner diameter and 63 mm outer diameter suit common hard-tube loops. Users who prefer flexible tubing, need a pump-reservoir combo, or require a shorter reservoir than the 278 mm overall length should consider other formats.

Fits custom loops with G 1/4 fittings

The reservoir mounts directly to the case using the supplied three-port end caps, adding 38 mm to the tube length for a total of 278 mm. Standard G 1/4 ports simplify plumbing with off-the-shelf fittings. Four low-profile caps seal unused ports cleanly. The acrylic tube and POM caps resist common coolants, leaving loop layout and pump choice entirely to the builder.

주요 특징

  • Compression-ring end caps seal without cutting tube
  • 240 mm reservoir length fits mid-tower builds
  • 25 in inner diameter supports high flow rates
  • Four low-profile port caps and two three-port end caps included
  • Made in the USA with laser-cut acrylic tube

사양

TypeReservoir

이 상품에 대한 질문

Which G 1/4 fittings and acrylic tubing with a 57 mm inner diameter do I need to complete the loop?

The reservoir accepts standard G 1/4 threaded fittings and is designed for 57 mm ID acrylic tubes; you must supply both to connect it to your cooling loop.

Will the 278 mm overall length and 63 mm outer diameter fit alongside my existing 120 mm radiator and pump?

At 278 mm long and 63 mm wide the cylinder needs a straight vertical clearance of that size; measure your case interior to confirm it clears the radiator and pump you plan to keep.

How can I verify the compression-ring end caps are sealing correctly after assembly?

Fill the loop slowly, watch the two 3-port end caps and four low-profile port caps for any drips, then run the pump — steady fluid level and no leaks mean the seals are working.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.