저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Grey ATX power supply unit with single fan, reduced depth design

Replace Power

Replace Power 420W ATX power supply for HP DX2300M

SKU CH-PD1E-H59Q6

420W ATX replacement unit for HP DX2300M series, single-rail design with 20+4pin and 12V connectors

  • ColorGrey
  • TypeATX
  • Fans1
  • Weight0.1
  • Delivers 420 W output for upgraded system stability
  • Single rail design provides consistent 12 V at 16 A
  • Compact reduced-depth chassis fits HP DX2300M series cases
  • Wide 115/230 V input range supports global mains voltages
  • Hold-up time of 17 ms maintains power during brief interruptions

Replacement 420W ATX PSU for HP DX2300M

This Replace Power unit is a direct replacement for the original 250W supply in HP DX2300M and DX2300 series desktops. It restores reliable operation to systems suffering from a failed or ageing power module. The reduced-depth form factor matches the chassis constraints of these specific models.

Single-rail 12V output with 16A capacity

The power supply delivers its 420W rating through a single +12V rail rated at 16A, alongside +3.3V and +5V rails at 13A each. This rail configuration is the critical specification that determines whether the unit can support the installed components. Auxiliary rails provide -12V at 0.8A, -5V at 0.5A and +5VSB at 2.5A.

Fits HP DX2300 chassis with 20+4 pin main connector

The PSU connects via a standard 20+4 pin ATX main connector and a dedicated +12V plug, matching the motherboard headers in the target HP systems. It accepts 115V or 230V input at 50 or 60Hz without manual switching. Hold-up time is 17ms and rise time is under 70ms. It is not suited for builds requiring higher 12V current or standard-depth ATX dimensions.

주요 특징

  • Delivers 420 W output for upgraded system stability
  • Single rail design provides consistent 12 V at 16 A
  • Compact reduced-depth chassis fits HP DX2300M series cases
  • Wide 115/230 V input range supports global mains voltages
  • Hold-up time of 17 ms maintains power during brief interruptions

사양

BrandReplace Power
ModelN/A
ColorGrey
TypeATX
Fans1
Weight0.1

이 상품에 대한 질문

How much power does the 420W rating actually deliver to the components in an HP DX2300M?

The unit provides a single +12V rail at 16A, +3.3V and +5V each at 13A, -12V at 0.8A, -5V at 0.5A and +5VSB at 2.5A, matching the original 250W part's output specification.

What does the 20+4 pin connector mean for compatibility with the motherboard?

The 20+4 pin main connector fits the standard ATX motherboard socket used in the DX2300M series and the split design also works with older 20-pin boards.

Will the reduced-depth chassis fit the original mounting points in the DX2300M case?

Yes, the supply is built as a direct replacement for HP part numbers 441390-001 and 440569-001 and uses the same ATX mounting pattern.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.