저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Grey ATX power supply unit with single fan and fixed cables

Replace Power

Replace Power ATX Power Supply 420W 280W HP 1350 1355 1357 1373 1383

SKU CH-DWFM-GEJ1P

ATX replacement unit rated 420 W peak with 280 W continuous output for HP 1350 1355 1357 1373 1383 desktops

  • ColorGrey
  • TypeATX
  • Fans1
  • Weight4
  • Fits HP desktops 1350 1355 1357 1373 1383
  • Reduced depth 5.86" increases case compatibility
  • 420 W peak output handles heavy loads
  • Low ripple and noise protects components
  • 24-pin 20+4 SATA Molex floppy connectors included

Replacement for HP 1350 1355 1357 1373 1383

This ATX power supply is built as a direct replacement for several HP desktop models including the A1350y A1355c A1357c A1373w and A1383w. It delivers a maximum output of 420 watts with a continuous rating of 280 watts. The unit suits owners of those systems who need a new PSU that matches the original form factor and connector layout.

Reduced depth ATX with fixed cabling

The housing measures 5.86 inches deep which is shorter than many standard ATX units so it fits tight chassis without protruding. A single 80mm fan provides airflow. Fixed cables include a 24 pin 20+4 motherboard connector a 4 pin CPU connector three SATA 15 pin connectors two Molex 4 pin connectors and one floppy 4 pin connector. The grey finish matches the original equipment aesthetic.

Low ripple noise and wide input range

The supply accepts AC input from 110 to 220 volts at 47 to 63 hertz and is Hi Pot tested with ROHS and CE compliance. Output rails cover +5V -5V +12V1 +12V2 +3.3V -12V and +5V standby. Rise time is under 70 milliseconds and hold up time is at least 17 milliseconds at nominal input. The design targets low ripple and noise for stable everyday operation.

주요 특징

  • Fits HP desktops 1350 1355 1357 1373 1383
  • Reduced depth 5.86" increases case compatibility
  • 420 W peak output handles heavy loads
  • Low ripple and noise protects components
  • 24-pin 20+4 SATA Molex floppy connectors included

사양

BrandReplace Power
ModelHP A1350y A1350y CTO A1355c A1357c A1373w A1383w
ColorGrey
TypeATX
Fans1
Weight4

이 상품에 대한 질문

What does the 24-pin (20+4) ATX connector support on this Replace Power unit?

The 24-pin (20+4) ATX connector fits both 20-pin and 24-pin motherboard headers, delivering +3.3 V, +5 V, +12 V1, +12 V2, -12 V and +5 V standby rails up to the unit's 280 W total rating.

How much clearance does the reduced-depth chassis need inside an HP A1350y or A1383w case?

The supply measures 5.86 inches deep, 3.3 inches wide and 4 inches tall, so it fits standard ATX bays while leaving extra room behind the drive cage for cable routing.

Which cables are permanently attached and what is the first connector to seat during installation?

All leads are fixed: one 24-pin (20+4) motherboard, one 4-pin CPU, three SATA 15-pin, two Molex 4-pin and one floppy 4-pin. Seat the 24-pin motherboard connector fully before plugging in the 4-pin CPU lead.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.