Rosewill
Rosewill VNG650 650W 80+ Gold ATX 3.1 Non-Modular Power Supply
A 650 W ATX 3.1 power supply with 80 PLUS Gold efficiency and a native 12V-2x6 connector for modern GPUs
- TypeATX 3.1 Compatible
- Maximum Power650 W
- Fans1 x 120 mm
- PFCActive
- Main Connector20+4Pin
- +12V RailsSingle
Options
- ATX 3.1 80+ Gold (1000W)
- ATX 3.1 80+ Gold (850W)
- ATX 3.1 80+ Gold (750W)
- ATX 3.1 80+Gold (650W) Native
취소선으로 표시된 버전은 존재하지만, 이곳에서는 취급하지 않습니다.
- Delivers up to 650 W for modern builds
- 80 PLUS Gold certified for high efficiency
- Native 12V-2x6 connector supports PCIe 5.1 graphics cards
- Compact 140 mm depth fits small-form-factor cases
- Six-protection suite guards against over-current and over-voltage
Compact 140 mm ATX 3.1 PSU
The Rosewill VNG650 is a 650 W non-modular power supply built to the ATX 3.1 standard. It fits a 140 mm depth chassis and uses a single 120 mm fan for cooling. The unit carries 80 PLUS Gold certification with up to 85 % efficiency. A native 12V-2x6 connector supports PCIe 5.1 graphics cards.
Builders who need Gen 5 GPU power
This unit suits builders installing a modern graphics card that requires the 12V-2x6 connector and can accept a fixed cable set. The six SATA connectors and two EPS cables cover typical storage and CPU needs. Systems that demand fully modular cabling or a shorter depth than 140 mm should consider other designs.
Sustained 650 W with excursion headroom
Under continuous load the single +12 V rail delivers the full 650 W rating. The platform is rated for 235 % total power excursion and 300 % GPU power excursion for short transients. Hold-up time is 16.6 ms minimum. Six protection circuits guard against over-current, over-power, over-temperature, over-voltage, short-circuit and under-voltage events.
주요 특징
- Delivers up to 650 W for modern builds
- 80 PLUS Gold certified for high efficiency
- Native 12V-2x6 connector supports PCIe 5.1 graphics cards
- Compact 140 mm depth fits small-form-factor cases
- Six-protection suite guards against over-current and over-voltage
사양
| Brand | Rosewill |
|---|---|
| Model | VNG650 |
| Type | ATX 3.1 Compatible |
| Maximum Power | 650 W |
| Fans | 1 x 120 mm |
| PFC | Active |
| Main Connector | 20+4Pin |
| +12V Rails | Single |
| PCI-Express Connector | 1 x 16-Pin, 2 x 6+2-Pin |
| SATA Power Connector | 6 |
| SLI | SLI Ready |
| Max PSU Length | 140 mm |
| Modular | Non-Modular |
| Hold-up Time | 16.6ms min. |
| Efficiency | Up to 85% |
| Energy-Efficient | 80 PLUS GOLD Certified |
| Over Voltage Protection | Yes |
| Overload Protection | Yes |
| Output | +3.3V@18A, +5V@18A, [email protected] , [email protected] , +5VSB@3A |
| Connectors | 1 x 20+4-Pin Main Connector 2 x 4+4-Pin ATX12V / EPS12V Connector 2 x 6+2-Pin PCI-E Connector 1 x 12+4-Pin 12V-2x6 Connector 6 x 15-Pin SATA Connector 3 x 4-Pin Peripheral Connector |
| 배송 무게 | 1.95 kg |
| 포장 크기 | 272 × 208 × 112 mm |
이 모델의 다른 버전
같은 라인업에서 3개 더
같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.
Rosewill VMG850 850W 80+ Gold ATX 3.1 power supply
- ATX 3.1 Compatible
- 850 W
Rosewill VMG1000 1000W ATX 3.1 power supply
- ATX 3.1 Compatible
- 1000 W
이 상품에 대한 질문
What motherboard power connectors does the VNG650 include for a standard ATX build?
The VNG650 provides a 20+4-pin main connector and two 4+4-pin ATX12V/EPS12V connectors for the motherboard.
Can the single 12V-2x6 connector on this 650 W unit supply a PCIe 5.1 graphics card alongside older 6+2-pin GPUs?
Yes, the native 12+4-pin 12V-2x6 cable delivers up to 450 W for a new GPU while two 6+2-pin PCIe connectors remain for additional cards.
How can I verify the 80 PLUS Gold efficiency is active after installing the VNG650?
Under typical load the PSU should run at up to 85 % efficiency; the 120 mm fan will stay quiet thanks to the optimized thermal control design.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.






