SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00502629BTC
재고 있음
SAMSUNG
SAMSUNG M393B2G70DB0-YK0 16GB DDR3 1600 CL11 1.35V ECC Registered
16 GB DDR3 ECC registered server memory running at 1600 MHz with CL11 latency and 1.35 V operation
- Capacity16GB
- Type240-Pin DDR3 SDRAM
- SpeedDDR3 1600 (PC3 12800)
- CAS LatencyCL11
- Voltage1.35V
- ECCYes
- 16 GB capacity supports larger server workloads
- DDR3 1600 speed delivers 12800 MB/s bandwidth
- CL11 latency provides responsive memory access
- 35 V operation reduces power consumption
- ECC registered design ensures data integrity
Product identity
This Samsung M393B2G70DB0-YK0 module provides 16GB of DDR3 registered ECC memory running at 1600 MT/s with CL11 latency. It uses a 240-pin DIMM form factor and operates at 1.35V, making it suitable for compatible server and workstation platforms.
Target fit
It suits administrators upgrading or repairing systems that require registered dual-rank DDR3 ECC modules at this speed and voltage. Builders needing unbuffered memory, higher frequencies, different capacities, or later DDR generations should look elsewhere.
Build integration
The module plugs into a standard 240-pin DDR3 slot and relies on the platform's memory controller to support registered ECC operation at 1.35V. Its dual-rank organisation helps populate channels efficiently in multi-socket servers without adding extra physical slots.
주요 특징
- 16 GB capacity supports larger server workloads
- DDR3 1600 speed delivers 12800 MB/s bandwidth
- CL11 latency provides responsive memory access
- 35 V operation reduces power consumption
- ECC registered design ensures data integrity
사양
| Brand | SAMSUNG |
|---|---|
| Model | M393B2G70DB0-YK0 |
| Capacity | 16GB |
| Type | 240-Pin DDR3 SDRAM |
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | CL11 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | Dual Rank |
이 상품에 대한 질문
Does my motherboard need 240-pin DDR3 slots that accept registered ECC modules for this M393B2G70DB0-YK0 kit to work?
Yes, the module is a 240-pin DDR3 SDRAM with registered ECC, so the board must provide DDR3 slots that support registered error-correcting memory at 1.35 V.
Can I mix this CL11 1.35 V registered stick with older CL9 1.5 V unbuffered DDR3 DIMMs?
No, registered and unbuffered DIMMs cannot be used together, and the voltage mismatch would prevent stable operation.
How do I verify the module runs at DDR3 1600 CL11 with ECC active after installation?
Check the BIOS memory information or an OS tool such as dmidecode; it should report 1600 MT/s, CAS 11, 1.35 V and ECC enabled.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
