SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00501272BTC
재고 있음
Sapphire Tech
Sapphire Tech NITRO+ Radeon RX 9070 11349-01-20G graphics card
16 GB GDDR6 graphics card with 3584 stream processors, a 2700 MHz boost clock and triple-fan cooling on a 3.2-slot ATX board
- InterfacePCI Express 5.0 x16
- Chipset ManufacturerAMD
- GPU SeriesAMD Radeon RX 9000 Series
- GPURadeon RX 9070
- ArchitectureRDNA 4
- Game ClockUp to 2210 MHz
- 16 GB GDDR6 on a 256-bit bus for high-resolution textures
- Boost clock up to 2700 MHz for responsive gaming
- PCI Express 5.0 x16 interface for maximum bandwidth
- Triple-fan cooler on a 331 mm ATX card
- Two HDMI and two DisplayPort 2.1a outputs drive four displays
Sapphire NITRO+ Radeon RX 9070 16GB
The Sapphire NITRO+ Radeon RX 9070 is a PCI Express 5.0 x16 graphics card built on AMD RDNA 4 architecture. It delivers a boost clock up to 2700 MHz and a game clock up to 2210 MHz across 3584 stream processors. The 16GB GDDR6 frame buffer runs on a 256-bit bus at an effective 20000 MHz, supporting DirectX 12 Ultimate and OpenGL 4.6.
16GB GDDR6 for 1440p and 4K gaming
This card suits enthusiasts targeting high refresh rates at 1440p or smooth 4K gameplay with 16GB of VRAM and PCIe 5.0 bandwidth. It requires a 650W power supply and a single 12V-2x6 connector, drawing up to 220W TDP. Builders with smaller cases or lower-wattage PSUs should consider more compact or efficient alternatives.
16GB capacity handles modern texture loads
The 16GB buffer comfortably manages current AAA titles at ultra settings and high-resolution texture packs without paging. At 8K resolution (7680 x 4320) or heavy ray-tracing workloads, the 256-bit interface and 220W power limit become the limiting factors before VRAM capacity does.
주요 특징
- 16 GB GDDR6 on a 256-bit bus for high-resolution textures
- Boost clock up to 2700 MHz for responsive gaming
- PCI Express 5.0 x16 interface for maximum bandwidth
- Triple-fan cooler on a 331 mm ATX card
- Two HDMI and two DisplayPort 2.1a outputs drive four displays
사양
| Brand | SAPPHIRE |
|---|---|
| Series | NITRO+ |
| Model | 11349-01-20G |
| Part Number | 11349-01-20G |
| Interface | PCI Express 5.0 x16 |
| Chipset Manufacturer | AMD |
| GPU Series | AMD Radeon RX 9000 Series |
| GPU | Radeon RX 9070 |
| Architecture | RDNA 4 |
| Game Clock | Up to 2210 MHz |
| Boost Clock | Up to 2700 MHz |
| Stream Processors | 3584 |
| Effective Memory Clock | 20000 MHz (20 Gbps) |
| Memory Size | 16GB |
| Memory Interface | 256-Bit |
| Memory Type | GDDR6 |
| DirectX | DirectX 12 Ultimate |
| OpenGL | OpenGL 4.6 |
| Multi-Monitor Support | 4 |
| HDMI | 2 x HDMI |
| DisplayPort | 2 x DisplayPort 2.1a |
| Max Resolution | 7680 x 4320 |
| Cooler | Triple Fans |
| Thermal Design Power | 220W |
| Recommended PSU Wattage | 650W |
| Power Connector | 1x 12V-2x6 pin |
| HDCP Ready | Yes |
| Form Factor | ATX |
| Max GPU Length | 331 mm |
| Card Dimensions (L x H) | 331x 129 x 66 mm |
| Slot Width | 3.2 Slots |
| 배송 무게 | 2.63 kg |
| 포장 크기 | 432 × 241 × 89 mm |
이 상품에 대한 질문
My motherboard only has PCI Express 4.0 slots — will the card still run at full speed?
The card uses a PCI Express 5.0 x16 interface but is backward compatible with PCIe 4.0 slots; bandwidth may be reduced slightly but the GPU will still operate at its 2210 MHz game clock and 2700 MHz boost clock.
I plan to keep my 650 W power supply — does the single 12V-2x6 connector fit my existing cables?
The card draws 220 W total board power and Sapphire recommends a 650 W PSU; the 12V-2x6 connector is the new ATX 3.0 standard so you will need a PSU that includes that cable or a native 12VHPWR lead.
After installing the card, how can I confirm the 16 GB GDDR6 is running at the rated 20 Gbps?
Open AMD Software Adrenalin Edition, select the Performance tab and check the memory clock — it should report 20000 MHz effective; GPU-Z will also show 256-bit bus width and GDDR6 memory type.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
