저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Green PCI card with metal bracket and two red eSATA ports

SATAGear

SATAGear ST-119e eSATA-150 RAID 2-Port PCI Card

SKU CH-3R8J-CHVJZ

Adds two eSATA ports with RAID 0 and 1 support over a 32-bit PCI interface at 33/66 MHz

  • TypePCI to SATA Card
  • External Ports2 x SATA II
  • Two shielded eSATA connectors for durable external links
  • RAID 0 striping writes data across two drives for faster throughput
  • 32-bit PCI host interface at 33/66 MHz for broad desktop compatibility
  • 48-bit LBA addressing supports drives larger than 137 GB
  • Independent 256-byte FIFOs per channel buffer host reads and writes

PCI-to-eSATA RAID adapter

The SATAGear ST-119e adds two external eSATA ports to a desktop through a 32-bit PCI slot. Each port runs at 1.5Gb/s and complies with Serial ATA 1.5G specifications. The card supports RAID 0 striping and RAID 1 mirroring across the two channels. It also delivers 1.5A at 5V and 2A at 12V to power attached drives.

Builders adding legacy external storage

This card suits owners of older tower systems that still have a free 33/66MHz PCI slot and need to connect eSATA enclosures or docks. The 48-bit LBA support handles drives larger than 137GB and hot-plug capability simplifies drive swaps. Systems without a conventional PCI slot cannot use this adapter. Users needing internal SATA ports or faster 3Gb/s and 6Gb/s links should look elsewhere.

Sustained throughput with dual-channel FIFOs

Each Serial ATA channel uses an independent 256-byte FIFO organised as 32-bit by 64-deep to buffer host reads and writes. The PCI host interface operates at 33 or 66MHz to keep data moving during long transfers. RAID 0 striping writes simultaneously to both drives for higher sustained bandwidth. Spread-spectrum receiver support helps maintain signal integrity under continuous load.

주요 특징

  • Two shielded eSATA connectors for durable external links
  • RAID 0 striping writes data across two drives for faster throughput
  • 32-bit PCI host interface at 33/66 MHz for broad desktop compatibility
  • 48-bit LBA addressing supports drives larger than 137 GB
  • Independent 256-byte FIFOs per channel buffer host reads and writes

사양

ModelST-119e
TypePCI to SATA Card
External Ports2 x SATA II

이 상품에 대한 질문

Does the ST-119e need a free 32-bit PCI slot running at 33 or 66 MHz?

Yes, the card uses a 32-bit PCI host interface that operates at 33 or 66 MHz, so an available slot of that type is required.

Can I keep my older SATA I drives and still use both eSATA ports on this card?

Each port runs at 1.5 Gb/s and is fully compliant with Serial ATA 1.5G specifications, so first-generation SATA drives will work on both connectors.

How do I verify the card is delivering the 1.5 A at 5 V and 2 A at 12 V to my external enclosures?

Connect the two-pin LED headers on the board; the LEDs will light when the card supplies power to the external ports.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.