저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인

Simmtec, Inc

Simmtec, Inc DDR DIMM 2GB (2 x 1GB) 184 pin 400MHz PC3200 CL2.5

SKU CH-YTHS-8G19H

Two 1 GB DDR DIMMs running at 400 MHz with CL2.5 latency on 184-pin PC3200 modules

  • Capacity2GB (2 x 1GB)
  • Dual-channel kit doubles bandwidth with matched 2 x 1 GB modules
  • 400 MHz clock keeps data flowing at PC3200 speeds
  • Low-density chips improve stability on older chipsets
  • CL2.5 latency tightens response for everyday tasks
  • 184-pin DIMM fits standard desktop DDR slots

Kit capacity and fit

This Simmtec DDR DIMM kit supplies two gigabytes of memory as a matched pair of one-gigabyte modules. The 184-pin form factor fits legacy desktop motherboards that accept DDR memory. It is intended for owners of older systems who need a straightforward capacity increase without changing platform.

Suitability and limits

The kit suits restorers and hobbyists repairing period-correct hardware or upgrading a single-channel board that recognises low-density modules. Builders who need more than two gigabytes total, higher bandwidth than PC3200 provides, or modules validated for modern multi-channel chipsets should look at something else.

Deciding specification

The CAS latency is rated at CL2.5 for the PC3200 400MHz data rate. Systems that require tighter timings at this speed or that cannot operate at the standard voltage for this latency class will not run stably with these modules.

주요 특징

  • Dual-channel kit doubles bandwidth with matched 2 x 1 GB modules
  • 400 MHz clock keeps data flowing at PC3200 speeds
  • Low-density chips improve stability on older chipsets
  • CL2.5 latency tightens response for everyday tasks
  • 184-pin DIMM fits standard desktop DDR slots

사양

Capacity2GB (2 x 1GB)

이 상품에 대한 질문

Does my motherboard need 184-pin DDR slots to use this 2 x 1 GB kit?

Yes, the modules are 184-pin DDR DIMMs that run at 400 MHz PC3200 with CL2.5 timing, so the board must provide matching DDR slots.

Can I keep my existing PC3200 CL3 modules and add this CL2.5 kit alongside them?

The system will run all modules at the slowest common speed, so the CL2.5 sticks will operate at CL3 to match the older memory.

How can I confirm the kit is running at 400 MHz with CL2.5 latency after installation?

Check the memory tab in CPU-Z or the BIOS SPD readout; both should report 400 MHz and CL2.5 for each 1 GB module.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.