SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00501908BTC
재고 있음
SK hynix
SK hynix HMA84GR7AFR4N-UH 32GB DDR4 PC4-19200 ECC Registered server RAM
32 GB DDR4 ECC registered server memory running at 2400 MHz with CL17 latency and 1.2 V operation
- Capacity32GB
- Type288-Pin DDR4 SDRAM
- SpeedDDR4 PC4-19200
- CAS LatencyCL 17
- Voltage1.2V
- ECCYes
- 32 GB capacity supports demanding server workloads
- DDR4 2400 MHz speed enables high-throughput data transfer
- ECC registered design corrects errors for data integrity
- Dual-rank 2G x 4 organisation maximises memory density
- CL 17 latency at 1.2 V balances performance and efficiency
32GB DDR4 ECC Registered module
This 32GB DDR4 module runs at PC4-19200 with a CAS latency of 17. It is built for servers and workstations that require error-correcting code and registered signal buffering. The 288-pin DIMM operates at a standard 1.2V.
Sustained load behaviour
Registered buffering reduces electrical load on the memory controller during continuous operation. ECC circuitry detects and corrects single-bit errors in real time without halting the system. Dual-rank x4 organisation maintains stable throughput across all 32GB under prolonged workloads.
DDR4 interface limits
The PC4-19200 rating sets a maximum data rate of 2400 MT/s for this module. JEDEC DDR4 specifications define the electrical and timing boundaries at 1.2V. Capacity per DIMM is fixed at 32GB with this 2G x 4 density.
주요 특징
- 32 GB capacity supports demanding server workloads
- DDR4 2400 MHz speed enables high-throughput data transfer
- ECC registered design corrects errors for data integrity
- Dual-rank 2G x 4 organisation maximises memory density
- CL 17 latency at 1.2 V balances performance and efficiency
사양
| Brand | SK hynix |
|---|---|
| Model | HMA84GR7AFR4N-UH |
| Capacity | 32GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 PC4-19200 |
| CAS Latency | CL 17 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2G x 4 |
이 상품에 대한 질문
How much heat does the 1.2 V registered ECC module produce during continuous 2400 MHz operation?
The module runs at 1.2 V with CL17 timing, so power draw and heat output stay within standard DDR4 registered DIMM limits for a 32 GB dual-rank stick.
Does my motherboard need 288-pin DDR4 slots that support ECC registered memory to use this DIMM?
Yes — the stick is a 288-pin DDR4 PC4-19200 registered ECC module, so the board must provide DDR4 RDIMM slots with ECC capability.
Will this CL17 2400 MHz registered ECC DIMM run at its rated speed when installed beside slower DDR4 registered ECC modules?
The memory controller will negotiate a common speed; all populated slots operate at the lowest supported frequency among the installed modules.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
