SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00506251BTC
재고 있음
SK hynix
SK hynix HMAA8GL7AMR4N-VK Load Reduced DDR4-2666 64GB CL19 ECC Registered server RAM
Load-reduced 64 GB DDR4-2666 ECC registered server memory with CL19 timing at 1.2 V
- Capacity64GB
- Type288-Pin DDR4 SDRAM
- SpeedDDR4 2666 (PC4 21300)
- 64 GB capacity supports large virtualisation workloads
- Load-Reduced quad-rank design reduces electrical load on the memory bus
- DDR4-2666 speed delivers 21300 MB/s bandwidth
- ECC registered operation detects and corrects single-bit errors
- CL19 latency at 1.2 V balances response time and power draw
64 GB Load-Reduced DDR4-2666 Server Memory
This 64 GB DDR4-2666 module uses load-reduced ECC registered technology to deliver high-capacity memory for multi-socket servers and virtualization hosts. The quad-rank x4 organisation reduces electrical load on the memory bus, allowing larger total system memory than standard registered DIMMs.
Replaces Standard Registered DIMMs When Capacity
Upgrading to load-reduced modules is worthwhile when the platform memory controller cannot populate all slots with standard registered DIMMs at rated speed. The reduced loading lets you fill more slots per channel while maintaining DDR4-2666 throughput.
DDR4-2666 Bus and 1.2 V Operation Define Practical
The PC4-21300 interface caps peak bandwidth at the rated 2666 MT/s, so workloads needing higher memory throughput will not benefit from this module. CL19 latency and 1.2 V operation are fixed by the DDR4-2666 standard and cannot be tightened without platform support for lower timings or higher voltages.
주요 특징
- 64 GB capacity supports large virtualisation workloads
- Load-Reduced quad-rank design reduces electrical load on the memory bus
- DDR4-2666 speed delivers 21300 MB/s bandwidth
- ECC registered operation detects and corrects single-bit errors
- CL19 latency at 1.2 V balances response time and power draw
사양
| Capacity | 64GB |
|---|---|
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2666 (PC4 21300) |
이 상품에 대한 질문
Will the 288-pin DDR4 module fit my server's memory slots?
Yes, the 288-pin DDR4 form factor matches standard DDR4 RDIMM slots used in compatible servers.
What is the correct way to seat this Load Reduced DIMM, and what step is often missed?
Align the notch with the slot key, press firmly until both side latches click; the step often missed is verifying both latches fully engage to register the module.
When should I plan to replace this 64GB ECC Registered module?
Replace it if memory diagnostics report uncorrectable ECC errors, the server fails POST with memory beeps, or a firmware update explicitly requires newer DRAM revisions.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
