저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
E1.L 9.5mm enterprise SSD with ruler form factor

Solidigm

Solidigm D5-P5316 15.36TB E1.L 9.5mm PCIe 4.0 Enterprise SSD SSDPFWNV153TZN1

SKU CH-VCX9-MZHCY MPN SSDPFWNV153TZN1

A 15.36 TB enterprise SSD in the E1.L 9.5 mm form factor with a PCIe 4.0 interface, delivering up to 7000 MB/s sequential read and 3200 MB/s sequential write using 144-layer QLC 3D NAND

  • Form FactorE1.L 9.5mm
  • Capacity15.36TB
  • Memory Components144L QLC 3D NAND
  • InterfacePCI-Express 4.0
  • Max Sequential ReadUp to 7000 MBps
  • Max Sequential WriteUp to 3200 MBps

Options 15.36TB, E1.L 9.5mm, Non-OPAL

  • 36TB capacity consolidates massive datasets in a single drive
  • PCIe 4.0 interface delivers up to 7000 MBps sequential read speed
  • 144-layer QLC 3D NAND enables high-density storage efficiency
  • E1.L 9.5mm form factor fits dense server deployments
  • Up to 3200 MBps sequential write accelerates warm data workloads

High-capacity E1.L enterprise SSD

The Solidigm D5-P5316 provides 15.36TB of storage in a 9.5mm E1.L form factor using PCIe 4.0 x4 connectivity. It is built for data-centre operators who need dense, read-optimised flash for warm-tier workloads. The drive employs 144-layer QLC 3D NAND to deliver high capacity at a lower cost per terabyte than TLC alternatives.

Capacity and performance headroom

Sequential reads reach up to 7000 MBps while writes peak at 3200 MBps, giving fast access to large datasets. The 15.36TB capacity lets a single 1U chassis scale toward petabyte-level storage density. Write-heavy or sustained random workloads will exhaust the QLC endurance budget faster than TLC drives.

Upgrade path from hard drives and earlier SSDs

The SSD replaces 2.5-inch hard drives and previous-generation solid-state storage to cut latency and rack space. The jump is worthwhile when consolidation, read throughput and power efficiency matter more than maximum write endurance. Buyers needing higher write durability or smaller form factors should evaluate other models.

주요 특징

  • 36TB capacity consolidates massive datasets in a single drive
  • PCIe 4.0 interface delivers up to 7000 MBps sequential read speed
  • 144-layer QLC 3D NAND enables high-density storage efficiency
  • E1.L 9.5mm form factor fits dense server deployments
  • Up to 3200 MBps sequential write accelerates warm data workloads

사양

BrandSolidigm
SeriesD5-P5316 SERIES
ModelD5-P5316
Part NumberSSDPFWNV153TZN1
Form FactorE1.L 9.5mm
Capacity15.36TB
Memory Components144L QLC 3D NAND
InterfacePCI-Express 4.0
Max Sequential ReadUp to 7000 MBps
Max Sequential WriteUp to 3200 MBps
배송 무게0.45 kg
포장 크기254 × 127 × 127 mm

이 모델의 다른 버전

같은 라인업에서 1개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

Will the E1.L 9.5mm form factor fit alongside my existing 2.5" U.2 drives in the same server?

The drive uses the EDSFF E1.L 9.5mm form factor which is physically different from 2.5" U.2 drives. It requires a server chassis and backplane specifically designed for E1.L modules.

How can I verify the PCIe 4.0 x4 link is active and delivering the rated 7000 MBps sequential read speed?

Check the link width and speed in your OS or BIOS (should show PCIe 4.0 x4), then run a sequential read benchmark such as fio; sustained reads near 7000 MBps confirm the link is operating correctly.

Does the single pack include a heatsink, mounting bracket or power cable for the E1.L slot?

The single pack contains only the SSD itself. E1.L drives are powered and cooled through the backplane connector, so no separate cables or heatsinks are included or required.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.