저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Rectangular E1.S 9.5mm SSD with green circuit board and silver label

Solidigm

Solidigm SBFPFUBU076T001 D5-P5430 7.68TB E1.S enterprise SSD

SKU CH-5JNP-PAFDB MPN SBFPFUBU076T001

7.68 TB E1.S 9.5 mm PCIe 4.0 x4 drive with 192-layer QLC 3D NAND for read-intensive server workloads

  • Form FactorE1.S 9.5mm
  • Capacity7.68TB
  • Memory Components192L QLC 3D NAND
  • InterfacePCI-Express 4.0
  • Max Sequential ReadUp to 6600 MBps
  • Max Sequential WriteUp to 1800 MBps

Option 7.68TB E1.S

구성 14개 더 보기
  • 68TB capacity fits massive datasets in a single E1.S 9.5mm drive
  • PCIe 4.0 x4 interface delivers up to 6600 MBps sequential read for fast data access
  • 757000 random read IOPS at QD256 accelerates latency-sensitive workloads
  • 58 DWPD endurance rating supports 8.07 PBW for read-intensive deployments
  • 2000000-hour MTBF and 1000 G shock resistance ensure reliability in dense servers

Capacity and form factor

The Solidigm D5-P5430 delivers 7.68TB in an E1.S 9.5mm form factor built for dense server chassis. It uses 192L QLC 3D NAND and a PCI-Express 4.0 x4 interface to serve read-intensive data centre workloads.

Sustained write behaviour

Sequential write speed reaches up to 1800 MBps while random write performance holds at 100000 IOPS at QD256. The 0.58 DWPD endurance rating and 8.07 PBW total bytes written reflect a design optimised for steady reads rather than heavy write cycles.

Endurance constraint

Rated endurance of 0.58 DWPD over five years determines whether this drive fits a given workload. Write-heavy applications that exceed this budget will need a higher-DWPD alternative.

주요 특징

  • 68TB capacity fits massive datasets in a single E1.S 9.5mm drive
  • PCIe 4.0 x4 interface delivers up to 6600 MBps sequential read for fast data access
  • 757000 random read IOPS at QD256 accelerates latency-sensitive workloads
  • 58 DWPD endurance rating supports 8.07 PBW for read-intensive deployments
  • 2000000-hour MTBF and 1000 G shock resistance ensure reliability in dense servers

사양

BrandSolidigm
ModelD5-P5430
Part NumberSBFPFUBU076T001
Form FactorE1.S 9.5mm
Capacity7.68TB
Memory Components192L QLC 3D NAND
InterfacePCI-Express 4.0
Max Sequential ReadUp to 6600 MBps
Max Sequential WriteUp to 1800 MBps
4KB Random Read757000 IOPS (4K, QD256)
4KB Random Write100000 IOPS (4K, QD256)
EnduranceUp to 0.58 DWPD / Up to 8.07 PBW
MTBF2,000,000 hours
Power Consumption (Idle)5W
Power Consumption (Active)15W
Operating Temperature0°C ~ +70°C
Max Shock Resistance1,000 G (Max) at 0.5 msec
Max Vibration ResistanceOperating: 2.17 GRMS (5 - 700 Hz) Max
Non-Operating: 3.13 GRMS (5 - 800 Hz) Max
Weight66.5g
배송 무게0.17 kg
포장 크기140 × 110 × 17 mm

이 모델의 다른 버전

같은 라인업에서 5개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

How much power does the D5-P5430 draw at idle and under load during all-day operation?

The drive consumes 5W at idle and up to 15W when active, so sustained daily use stays within that envelope.

What server slot and form factor are required to install this E1.S 9.5mm drive?

You need an open E1.S 9.5mm bay with a PCIe 4.0 x4 backplane connection; no cabling or adapter is included.

Will this PCIe 4.0 SSD run at full speed in a PCIe 3.0 backplane I already use?

It is backward compatible with PCIe 3.0 slots, but sequential reads will be limited to the 3.0 bus ceiling rather than the rated 6600 MBps.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.