저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Silver aluminum rectangular enclosure with USB-C port and protective case

TERRAMASTER

TERRAMASTER D1 SSD 10Gbps M.2 NVMe drive enclosure

SKU CH-6J81-3JGXE

Rugged M.2 NVMe enclosure with IP67 waterproof and 1.2-ton crush-proof aluminium housing, 10 Gbps USB-C transfer and a mobile backup app

  • Size1.8"L x 0.8"W x 4.5"H
  • ColorSilver
  • External InterfaceUSB 3.2 Gen 2
  • MaterialAluminum
  • Internal Interface2280 NVMe
  • SpecificationsData Transfer Rate: 10Gp/s

Model D1 SSD - 10Gbps

  • Rugged protection with IP67 waterproof and dustproof rating plus 1.2-ton crush resistance
  • Silent operation via all-aluminum passive cooling with 34 fins and pre-installed thermal pad
  • Fast 1020MB/s read and 1010MB/s write speeds over USB 3.2 10Gbps Type-C
  • One-tap phone backup using TDAS app for iOS 15.6+ and Android 11+
  • Ready-to-go kit includes protective case, USB C-to-C cable, thermal pad and screwdriver

Rugged 10 Gbps M.2 NVMe Enclosure

The TerraMaster D1 SSD is a single-bay USB 3.2 Gen 2 enclosure built around an aerospace-grade aluminium shell. It accepts one M.2 2280 NVMe drive up to 8 TB and is rated IP67 waterproof, dustproof and 1.2-ton crush-proof for field use.

Tool-free drive fitting with thermal pad

Slide the NVMe module into the internal slot, apply the pre-cut thermal conductive silicone pad and close the gasket-sealed cover. No screws are needed for the drive itself; the included screwdriver secures the port cover. Forgetting to align the gasket or leaving the port cover off voids the IP67 seal.

USB 3.2 Gen 2 caps throughput at 1020 MB/s

The 10 Gbps Type-C interface limits sustained reads to about 1020 MB/s and writes to 1010 MB/s, well below the drive’s native PCIe potential. The TDAS mobile app requires iOS 15.6+ or Android 11+ for one-tap phone backup.

주요 특징

  • Rugged protection with IP67 waterproof and dustproof rating plus 1.2-ton crush resistance
  • Silent operation via all-aluminum passive cooling with 34 fins and pre-installed thermal pad
  • Fast 1020MB/s read and 1010MB/s write speeds over USB 3.2 10Gbps Type-C
  • One-tap phone backup using TDAS app for iOS 15.6+ and Android 11+
  • Ready-to-go kit includes protective case, USB C-to-C cable, thermal pad and screwdriver

사양

BrandTerraMaster
SeriesSSD Enclosure
ModelD1 SSD (10Gbps)
Size1.8"L x 0.8"W x 4.5"H
ColorSilver
External InterfaceUSB 3.2 Gen 2
MaterialAluminum
Internal Interface2280 NVMe
SpecificationsData Transfer Rate: 10Gp/s
Number of Bay1 Bay
Dimensions4.5″ × 1.8″ × 0.8″
Weight0.4 Pounds
FeaturesCompatible Devices: Windows, Mac, Linux, Android, iOS
Package ContentsIncluded Components: USB Type C to C Cable, Quick Guide, Thermal Conductive Silicone Pad, Protective Case, Screwdriver

이 모델의 다른 버전

같은 라인업에서 2개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

How do I confirm the D1 SSD is delivering the 1020MB/s read speed after connecting it via USB 3.2 Gen 2?

Use a disk-benchmark tool on Windows, Mac, Linux, Android or iOS to run a sequential read test; sustained results near 1020MB/s show the enclosure and NVMe drive are operating at the rated 10Gbps link speed.

What comes in the box and what must I supply myself?

The package includes a USB Type-C to Type-C cable, quick guide, thermal conductive silicone pad, protective carrying case and screwdriver; you must provide your own M.2 2280 NVMe SSD.

Which TerraMaster D1 model should I pick if I need the 10Gbps USB 3.2 Gen 2 interface and a single M.2 2280 slot?

Choose the base D1 SSD — it offers one M.2 2280 NVMe bay, 10Gbps USB Type-C connectivity and up to 8TB capacity, while the Plus and Pro versions step up to 40Gbps and 80Gbps respectively.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.