Thermal Grizzly
Thermal Grizzly Hydronaut 1g thermal paste
High-performance thermal compound with 11.8 W/mK conductivity for water-cooling and overclocking, non-conductive and silicone-free in a 1g syringe
- Specifications1 gram
- FeaturesHydronaut can be used for overclocking due to it's excellent
- Optimised heat transfer for large coolers with 11.8 W/mK conductivity
- Zero electrical risk with 0 pS/m non-conductive formula
- Ready to use instantly with no curing time required
- Silicone-free blend stays flexible and easy to apply at 140-190 Pas viscosity
- Extreme temperature stability from -200°C to +350°C operating range
High-conductivity paste for water-cooled builds
Thermal Grizzly Hydronaut is a 1g syringe of grey thermal compound rated at 11.8 W/mK thermal conductivity and 0.0076 K/W thermal resistance. It contains no electrically conductive particles and requires no curing time. The silicone-free formula stays flexible across an operating range of -200°C to +350°C.
Verify cooler mounting pressure and surface flatness
The paste viscosity sits between 140 and 190 Pas at a density of 2.6 g/cm³, so it spreads best under even pressure from a secured cold plate or water block. Ensure both CPU heatspreader and block base are clean, flat and free of old compound residue before application. No electrical conductivity means accidental smears near components will not cause shorts.
Fills microscopic gaps on large cold plates
A single gram covers multiple installations on mainstream desktop sockets or larger server heatspreaders. The non-curing consistency lets you remount the block without replacing the paste each time. It is suited to overclocking scenarios where sustained heat loads demand stable thermal resistance across wide temperature swings. Builders needing only a tiny dab for a laptop or small-form-factor chip may find the 1g volume more than necessary.
주요 특징
- Optimised heat transfer for large coolers with 11.8 W/mK conductivity
- Zero electrical risk with 0 pS/m non-conductive formula
- Ready to use instantly with no curing time required
- Silicone-free blend stays flexible and easy to apply at 140-190 Pas viscosity
- Extreme temperature stability from -200°C to +350°C operating range
사양
| Brand | Thermal Grizzly |
|---|---|
| Model | TG-H-001-RS |
| Part Number | TG-H-001-RS |
| Specifications | 1 gram |
| Features | Hydronaut can be used for overclocking due to it's excellent thermal conductivity. |
이 상품에 대한 질문
What comes in the package and do I need any extra tools to apply it?
The package contains a 1 gram syringe of gray silicone-free paste; no spreader or cleaning wipes are included, so you will need a lint-free cloth and isopropyl alcohol to prepare the surfaces.
The only size listed is 1 g — how do I know if that is enough for my build?
One gram typically covers several CPU or GPU applications; for a single processor install it is usually sufficient, while multiple builds or large cold-plate areas may require an additional syringe.
The thermal conductivity is rated at 11.8 W/mK — what does that actually mean for my temperatures?
It indicates very high heat-transfer capability, so when used between a CPU or GPU and a water-block or large air cooler it helps keep core temperatures lower under heavy load.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
US$0.82
0.00001049BTC
재고 있음