저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Rectangular grey thermal pad, 120 by 20 mm, point 5 mm thick

Thermal Hero

Thermal Hero NEO thermal pad 120 x 20 mm 0.5 mm 12 W/mK

SKU CH-3RW7-FKEW1

A 120 x 20 mm silicone pad with 12 W/mK conductivity and 0.5 mm thickness for CPU, GPU and console cooling

  • High thermal conductivity up to 12.0 W/mK for efficient heat transfer
  • Medium-soft 30 Shore pads compress easily to fill surface gaps
  • Non-conductive and non-toxic with RoHS and REACH compliance
  • Pre-cut 120 x 20 mm size at 0.5 mm thickness fits CPU, GPU and IC
  • Designed for overclocking, gaming consoles and high-performance laptops

Thermal Hero NEO pad 120 x 20 mm

The Thermal Hero NEO thermal pad measures 120 by 20 mm and is 0.5 mm thick. It provides a thermal conductivity of 12.0 W/mK with low thermal resistance. The pad is non-toxic, non-electrically conductive and complies with ROHS and REACH. It suits CPUs, GPUs, ICs and gaming consoles such as Xbox and PlayStation.

Upgrades from lower-conductivity pads

This pad replaces standard thermal pads that offer lower conductivity or higher resistance. The jump is worthwhile when a component runs hot under sustained load and needs better heat transfer to the heatsink. It is also suited for overclocking and gaming scenarios where cooling performance matters. Buyers who need a thicker gap filler or a different pad size should look elsewhere.

Check gap thickness and surface area

Verify that the 0.5 mm thickness matches the gap between your component and its cooler. Ensure the 120 x 20 mm dimensions cover the entire die or chip area you intend to cool. The pad has a 30 Shore hardness, making it medium soft and easy to compress for beginners and experts alike. Confirm the surface is clean before application.

주요 특징

  • High thermal conductivity up to 12.0 W/mK for efficient heat transfer
  • Medium-soft 30 Shore pads compress easily to fill surface gaps
  • Non-conductive and non-toxic with RoHS and REACH compliance
  • Pre-cut 120 x 20 mm size at 0.5 mm thickness fits CPU, GPU and IC
  • Designed for overclocking, gaming consoles and high-performance laptops

사양

이 상품에 대해 아직 공개된 사양이 없습니다.

이 상품에 대한 질문

Will the 120 x 20 mm pad cover my GPU memory chips?

The sheet measures 120 mm by 20 mm and is .5 mm thick; trim it to match the exact layout of your memory modules or VRM area.

How do I install the pad without trapping air bubbles?

Clean both surfaces with isopropyl alcohol, peel the protective film, lay the pad flat, then press the heatsink down evenly so the 30 Shore material compresses uniformly.

When should I replace the pad in a gaming console?

The manufacturer rates the pad for long-term stability at high temperatures; plan on swapping it after several years or whenever you reapply paste to the main die.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.