Ziro 3D PLA Pro Filament 1.75mm 1kg Lavender 3d printers accessory
- Lavender
- Filament
VEVOR
Eight-in-one combo press transfers designs onto 15"×15" shirts, caps, mugs and plates with dual-tube heating and 360° swing-away arm
The VEVOR 8 in 1 heat press machine combines a 15x15 inch flat platen with attachments for caps, mugs and plates. It is built for hobbyists and small businesses that want to personalise shirts, hats, mugs and plates from a single workstation.
The unit ships fully assembled and runs on a standard 110 V, 60 Hz supply drawing 1000 W. Its 360° swing-away arm moves the heating element to the side, clearing the workspace for safe layout and removal of garments or blanks.
The flat platen handles transfers up to 15x15 inches, while four mug presses cover 9 oz, 11 oz, 12 oz and 17 oz sizes alongside a 6x3 inch cap press and two plate presses up to 8 and 10 inches. Maximum temperature reaches 210 °C (410 °F) with a centre-to-edge variance of about 5 °C, so very large or unusually thick items may fall outside the press area or temperature uniformity.
| Type | Other Appliances |
|---|
Dual-tube heating keeps the difference between centre and edge to about 5 °C, so the platen stays uniform even after hours of pressing.
Two-layer insulation limits the outer housing to roughly 50-70 °C while the working temperature hits 210 °C.
The set handles 9 oz, 11 oz (3-3.5 in diameter), 12 oz and 17 oz mugs.
이 진열대의 다른 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
결제할 코인과 가격을 확인할 통화입니다.
체크아웃 시 지갑에서 전송됩니다.
표시 전용 — 카탈로그 가격은 달러 기준입니다.
일치하는 통화가 없습니다.
사이트에서 사용할 언어를 선택하십시오.
일치하는 언어가 없습니다.
처음 방문하셨나요?
이미 계정이 있으신가요?
자동 재설정 기능은 없습니다. 이 쇼핑몰은 어떠한 메일도 보내지 않으므로 요청할 일회용 링크 자체가 없습니다. 계정에 등록된 이메일 주소를 그대로 두시면 담당자가 직접 확인해 처리합니다.
요청 접수
받은편지함으로 오는 것은 아무것도 없습니다 — 이 쇼핑몰은 메일을 전혀 보내지 않습니다. 담당자가 직접 확인해 처리합니다.
기억나셨나요?