VEVOR
VEVOR TLM-2310-S Hat Heat Press Machine 580W 3D Printers Accessories
Hat heat press with four interchangeable platens, a cap stretcher and precise temperature control up to 1999 seconds
- TypeOther Appliances
- Precise heat control with adjustable temperature and time settings
- Four interchangeable platens expand project versatility for hats and caps
- Built-in cap stretcher ensures even pressure across curved surfaces
- Compact 360 x 216 x 350 mm footprint fits tight workspaces
- 580 W heating element reaches working temperature quickly
Hat heat press with four platens
The VEVOR TLM-2310-S is a 580 W hat heat press supplied with four interchangeable cap platens, a cap stretcher, suction-cup feet, a starter hat and sublimation paper. It targets hobbyists and small-business makers who personalise headwear using HTV or sublimation transfers.
Suited for cap-focused creators.
This unit suits users who mainly decorate hats and caps and need quick platen changes for different crown shapes. Buyers who require a flat platen for T-shirts, tote bags or other flat substrates should look at a swing-away or clamshell press instead.
580 W heating with 1999-second timer
The 580 W element reaches working temperature for standard HTV and sublimation on caps, and the digital timer runs up to 1999 seconds for long dwell cycles. Very thick or multi-layer fabrics may need longer heat-soak than the timer allows, and the machine lacks a flat platen for non-cap items.
주요 특징
- Precise heat control with adjustable temperature and time settings
- Four interchangeable platens expand project versatility for hats and caps
- Built-in cap stretcher ensures even pressure across curved surfaces
- Compact 360 x 216 x 350 mm footprint fits tight workspaces
- 580 W heating element reaches working temperature quickly
사양
| Type | Other Appliances |
|---|
이 상품에 대한 질문
What power supply is required to run the 580 W heat press?
The unit operates from a standard mains outlet rated for 580 W; no additional power equipment is needed.
Will the four interchangeable platens fit on my existing workbench measuring 360 mm wide?
The press footprint is 360 mm wide by 216 mm deep, so it matches that bench width exactly.
How do I confirm the temperature control is accurate after setup?
Set a target temperature, wait for the display to stabilise, then verify with an independent contact thermometer on the platen surface.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
