저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Vszerda 10GBASE-T network card, PCIe x4, low-profile bracket included

Vszerda

Vszerda SD-PEX24055 10GBASE-T network card

SKU CH-Z61G-F289F

Adds a single 10 GbE port over PCIe 3.0 x4 with multi-gig speeds down to 100 Mbps on existing copper cabling

  • Speed5000 megabits_per_second
  • FeaturesDesktop
  • Dimensions3.25 in x 4.8 in x 0.75 in
  • Weight0.12 lb
  • Package Contents(1) 10 GigaBit Ethernet Card^(1) Low Profile Bracket^(1) Man
  • 10 Gbps over existing Cat 6a cabling up to 100 m
  • Multi-gig speeds from 100 Mbps to 10 Gbps on a single port
  • PCIe 3.0 x4 interface delivers full 10 Gbps throughput
  • Energy Efficient Ethernet and PTP 1588v2 reduce power and sync time
  • Low-profile bracket included fits compact desktop chassis

Single-port 10 GbE NIC for desktop PCIe x4

The Vszerda SD-PEX24055 adds a single 10 GbE port to a desktop system through a PCIe 3.0 x4 slot. It uses the AQtion AQC107 controller to deliver multi-gigabit speeds over existing copper cabling. The half-height card ships with a low-profile bracket for small-form-factor cases.

Sustained throughput with multi-gig PHY and EEE

The AQrate PHY supports 10GBASE-T, 5GBASE-T and 2.5GBASE-T rates without dropping to lower speeds during extended transfers. Energy Efficient Ethernet reduces power draw when the link is idle, and IEEE 802.3x flow control prevents packet loss under continuous heavy load. Precision Time Protocol 1588v2 keeps latency predictable for time-sensitive workloads.

Verify slot width cable category and driver support

Confirm the motherboard has a free PCIe x4 or larger slot running at Gen 3.0 or higher. Ten gigabit operation requires Cat 6a cable for the full 100 m reach; Cat 5e is limited to 5 Gbps and 2.5 Gbps. Check that your operating system includes or can load a driver for the AQC107 controller before installation.

주요 특징

  • 10 Gbps over existing Cat 6a cabling up to 100 m
  • Multi-gig speeds from 100 Mbps to 10 Gbps on a single port
  • PCIe 3.0 x4 interface delivers full 10 Gbps throughput
  • Energy Efficient Ethernet and PTP 1588v2 reduce power and sync time
  • Low-profile bracket included fits compact desktop chassis

사양

BrandIO Crest
ModelSD-PEX24055
Part NumberSD-PEX24055
Speed5000 megabits_per_second
FeaturesDesktop
Dimensions3.25 in x 4.8 in x 0.75 in
Weight0.12 lb
Package Contents(1) 10 GigaBit Ethernet Card^(1) Low Profile Bracket^(1) Manual^(1) Driver CD

이 상품에 대한 질문

How much heat and power does the AQC107 controller draw when the card runs at 10 Gbps all day?

The single-chip AQC107 integrates MAC, PHY and PCIe 3.0 x4, so the card stays cool and power-efficient without a fan; Energy Efficient Ethernet (IEEE 802.3az) further reduces draw during low-traffic periods.

What slot and cable does my desktop need for this SD-PEX24055 to work?

You need a free PCIe x4 (or larger) slot and a Cat 6 or Cat 6a patch cable for 10 Gbps; Cat 5e will link at 2.5 Gbps or 5 Gbps.

Will this 10GBASE-T card talk to my existing 1 GbE switch and Cat 5e runs?

Yes — the AQrate PHY is IEEE 802.3bz and NBASE-T compliant, so it auto-negotiates down to 1000BASE-T, 100BASE-TX or 2.5/5 Gbps over the same copper.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.