XPG SX8200 Pro ASX8200PNP-2TT-C 2TB internal SSD
- Internal Solid Stat…
- Consumer
XPG
PCIe 4.0 x4 M.2 2280 SSD delivering 7400 MBps read and 6800 MBps write with an integrated heatsink
Options 2TB
The XPG GAMMIX S70 is a 2TB internal SSD built on the PCIe 4.0 x4 interface and the M.2 2280 form factor. It uses 3D NAND flash with an InnoGrit IG5236 controller and a DDR4 cache to deliver sequential reads up to 7400 MBps and writes up to 6800 MBps. The drive targets gamers, overclockers and PC enthusiasts who need high throughput for large game libraries and content workloads.
Verify that your motherboard has an M.2 slot wired for PCIe 4.0 x4 to reach the advertised speeds; the drive will fall back to PCIe 3.0 if the platform only supports that generation. Ensure the slot can accommodate a double-sided module with the pre-installed aluminium heatsink, as the terraced spreader adds height. The operating range is 0°C to 70°C, so confirm case airflow can keep the drive within those limits.
The bundled heatsink uses hollow chambers and a terraced profile to increase surface area, lowering temperatures by up to thirty percent during sustained transfers. The drive is compliant with NVMe 1.4 and rated for 1480 TBW with an MTBF of 2000000 hours, indicating a high endurance ceiling for heavy write cycles. Random performance reaches 750000 IOPS for both read and write, keeping load times consistent across repeated sessions.
| Brand | XPG |
|---|---|
| Series | GAMMIX S70 |
| Model | AGAMMIXS70-2T-C |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 2TB |
| Memory Components | 3D NAND |
| Interface | PCI-Express 4.0 x4 |
| Controller | InnoGrit IG5236 |
| Cache | DDR4 |
| Max Sequential Read | Up to 7400 MBps |
| Max Sequential Write | Up to 6800 MBps |
| 4KB Random Read | Up to 750,000 IOPS |
| 4KB Random Write | Up to 750,000 IOPS |
| Terabytes Written (TBW) | 1480TB |
| MTBF | 2,000,000 hours |
| HeatSink | with HeatSink |
| Features | This product is compatible with the latest Intel and AMD platforms and must be used with a motherboard that supports PCIe 4.0 to achieve optimal performance. Actual performance may vary depending on the hardware and software configurations. This product is backward compatible with PCIe 3.0. If a third-generation PCIe motherboard is used, this product will be able to achieve sequential read/write speeds of 3400/3000MB per second. Actual performance may vary due to available SSD capacity, system hardware and software components, and other factors. |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -40°C ~ +85°C |
| Max Shock Resistance | 1500G |
| Height | 15.00mm |
| Width | 25.20mm |
| Depth | 80.00mm |
| Weight | 34.00g |
이 모델의 다른 버전
같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.
The drive ships with an integrated aluminium heatsink that uses a terraced structure and hollow chambers for airflow, so no separate cooler is required.
The 2TB model is rated for 1480 TBW and 2,000,000 hours MTBF, giving higher total write endurance than smaller capacities in the same series.
Sequential reads up to 7400 MB/s are possible on a PCIe 4.0 x4 slot with NVMe 1.4 support; on a PCIe 3.0 slot speeds will be limited to the 3.0 ceiling.
이 진열대의 다른 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
결제할 코인과 가격을 확인할 통화입니다.
체크아웃 시 지갑에서 전송됩니다.
표시 전용 — 카탈로그 가격은 달러 기준입니다.
일치하는 통화가 없습니다.
사이트에서 사용할 언어를 선택하십시오.
일치하는 언어가 없습니다.
처음 방문하셨나요?
이미 계정이 있으신가요?
자동 재설정 기능은 없습니다. 이 쇼핑몰은 어떠한 메일도 보내지 않으므로 요청할 일회용 링크 자체가 없습니다. 계정에 등록된 이메일 주소를 그대로 두시면 담당자가 직접 확인해 처리합니다.
요청 접수
받은편지함으로 오는 것은 아무것도 없습니다 — 이 쇼핑몰은 메일을 전혀 보내지 않습니다. 담당자가 직접 확인해 처리합니다.
기억나셨나요?