BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
YINGHUA
An LGA 1151 micro-ATX board with dual DDR4 slots up to 16 GB, an NVMe M.2 interface, three SATA 3.0 ports and PCIe x16 plus x1 expansion
The YINGHUA H310D is an M-ATX server motherboard built on the Intel H310 chipset. It fits LGA 1151 processors from the 6th through 9th generations and provides two DDR4 slots with a maximum capacity of 16 GB. The board includes one PCI-E 16X slot, one PCI-E 1X slot and three SATA 3.0 ports for storage expansion.
The board measures 196 mm by 170 mm, so verify that your chassis accepts an M-ATX layout. The supplier notes that a power supply of at least 500 W from a reputable brand is required. The CMOS battery is removed before shipping and must be sourced locally. Confirm that your CPU cooler mounting holes match the LGA 1151 pattern.
Onboard NVMe M.2 gives a direct path for high-speed solid-state storage. Three SATA 3.0 connectors support additional hard drives or SSDs. USB 3.1 headers provide front-panel connectivity for fast peripherals. A Realtek LAN controller handles wired networking. The S/PDIF header allows digital audio output to external receivers.
| CPU Type | Intel Atom |
|---|
The board is sold alone; you must supply an LGA 1151 processor, up to two DDR4 modules for a maximum of 16 GB, and your own NVMe M.2 drive.
Any LGA 1151 CPU from the 6th to 9th generation Core i3, i5 or i7 lineup is supported; pick the generation that matches your performance target and budget.
You can populate both DDR4 slots for a total of 16 GB running in dual-channel mode; the board will not recognise more memory than that.
이 진열대의 다른 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
결제할 코인과 가격을 확인할 통화입니다.
체크아웃 시 지갑에서 전송됩니다.
표시 전용 — 카탈로그 가격은 달러 기준입니다.
일치하는 통화가 없습니다.
사이트에서 사용할 언어를 선택하십시오.
일치하는 언어가 없습니다.
처음 방문하셨나요?
이미 계정이 있으신가요?
자동 재설정 기능은 없습니다. 이 쇼핑몰은 어떠한 메일도 보내지 않으므로 요청할 일회용 링크 자체가 없습니다. 계정에 등록된 이메일 주소를 그대로 두시면 담당자가 직접 확인해 처리합니다.
요청 접수
받은편지함으로 오는 것은 아무것도 없습니다 — 이 쇼핑몰은 메일을 전혀 보내지 않습니다. 담당자가 직접 확인해 처리합니다.
기억나셨나요?